Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Wood-Tar Pitch: Tar Boiled Down (Ure, 1839)
Pitch is tar with its volatile part boiled away. Ure (1839): boil tar in an open iron pot until the volatile matters are driven off. What is left is brittle when cold and soft when warm, the binder for a chaser's pitch bowl. Boil birch tar outdoors over a gentle fire, test a drop on a cold stone, and pour it out to set.
The picture: our diagram of the pot and the drop test.
Baguhan
A few hours
Mga Tagubilin
1
1
Heat the tar outdoors
Heat the tar outdoors
Weigh birch tar into an open iron pot and set it over a gentle fire outdoors, away from buildings. Keep a lid at hand to smother a flare-up.
Mga materyales para sa hakbang na ito:
Alkitran ng Betula1 kgMga kailangang kasangkapan:
Kaldero na kaeng bakal
Hukay ng apoy
Digital na Timbangang Pangkusina
Guwantes na Katad Pangtrabaho2
2
Boil it down
Boil it down
Boil it gently, stirring, until the volatile part has been driven off.
Mga kailangang kasangkapan:
Kaldero na kaeng bakal
Mahabang sagwang panghalo na kahoy
Guwantes na Katad Pangtrabaho3
3
Test a drop
Test a drop
Drop a little on a cold stone. When the cooled drop is brittle and snaps, the pitch is done; if it stays soft, boil longer.
Mga kailangang kasangkapan:
Patag na Batong Lapida
Mahabang sagwang panghalo na kahoy4
4
Pour and keep
Pour and keep
Pour the pitch onto a wet stone slab to set and weigh it. It softens again with heat.
Mga kailangang kasangkapan:
Patag na Batong Lapida
Tubig
Digital na Timbangang Pangkusina
Guwantes na Katad Pangtrabaho5
5
How much boils off
How much boils off
Naglo-load ng Jupyter notebook…
Mga Materyales
1- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

