SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Wooden Spile: a Bored and Tapered Tap Spout
A spile is a wooden or metal peg or spout. Driven into a hole in a maple or birch, it carries the sap out into a pail; in a cask it lets gas out. Bore a hardwood dowel through its length, taper one end to fit the hole, and cut a lip to hang the pail on.
The picture: a birch tap made by Henry David Thoreau from a hollow sumac stick bound with string.
Baguhan
An hour
Mga Tagubilin
1
1
Cut and bore
Cut and bore
Saw 10 cm of hardwood dowel. Hold it upright in the vise and drill a 5 mm hole down its centre, from both ends if the bit is short, until they meet.
Mga materyales para sa hakbang na ito:
Mga tarugong matigas na kahoy1 pirasoMga kailangang kasangkapan:
Lagaring may gulugod
Bais sa Mesang Panggawa
Barenang de-kamay
Ruler2
2
Taper the end
Taper the end
Whittle one end to a taper over about 3 cm, ending a little smaller than your tap hole, so it drives in tight.
Mga kailangang kasangkapan:
Kutsilyong Sloyd
Kikil na pangkahoy (rasp)3
3
Spout and hook
Spout and hook
Cut the outer end at a slant so the sap drips clear, and saw a shallow notch on top to hang a pail by its bail.
Mga kailangang kasangkapan:
Lagaring may gulugod
Kutsilyong Sloyd4
4
Taper
Taper
Naglo-load ng Jupyter notebook…
Mga Materyales
1- 1 pirasoPlaceholder
Mga Kinakailangang Kasangkapan
6- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

