SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Woven Wire Cloth on a Wire Loom
Wire mesh, or wire gauze, is cloth woven from metal wire on a loom much like a textile loom. Warp wires run the length of the cloth; a shuttle, or in later looms sliding carriers, takes the weft wire across through the shed, and the lathe (beater) knocks it up to the fell of the cloth, twice in hand weaving. Fine wire is soft and easily kinked, so the shed is kept low to avoid straining the warp. Mesh is named by its count, historically the number of openings per inch.
Abantado
Factory process
Mga Tagubilin
1
1
Warp the loom
Warp the loom
Set the warp wires side by side at the spacing for the mesh count.
Mga materyales para sa hakbang na ito:
Kawad na hindi kinakalawang na asero1 as requiredMga kailangang kasangkapan:
Habihan ng wire cloth2
2
Open a low shed
Open a low shed
Lift and lower alternate warp wires to open a shed, kept low so the warp is not strained.
Mga kailangang kasangkapan:
Habihan ng wire cloth3
3
Pass the weft
Pass the weft
Carry the weft wire across through the shed with the shuttle.
Mga kailangang kasangkapan:
Habihan ng wire cloth4
4
Beat up
Beat up
Bring the lathe forward to beat the weft wire up to the fell; repeat shed, weft and beat for every wire.
Mga kailangang kasangkapan:
Habihan ng wire clothMga Materyales
1- 1 as requiredPlaceholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.


