تعاون
فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات
120-Mesh Sieve: U.S. Standard Sieve No. 120 (Bureau of Standards, 1924)
Tex

تخلیق کار

Tex

3. نومبر 2026FO
4
0
0
1
0

120-Mesh Sieve: U.S. Standard Sieve No. 120 (Bureau of Standards, 1924)

The standard testing sieve No. 120: plain-woven brass or bronze wire cloth with 0.125 mm (0.0049 in) openings and 0.086 mm (0.0034 in) wire, soldered smoothly into a round frame about 20 cm (8 in) across. Result: a sieve that passes grains under 0.125 mm and holds back larger ones, made to the Bureau of Standards tolerances. Source: Bureau of Standards, Letter Circular 74, Standard Specifications for Sieves (revised 1924). Unknown: the frame metal and the weaving. Picture: the Bureau's table.
درمیانہ
Unknown

ہدایات

1

Weave the wire cloth

Weave plain (not twilled) cloth from brass, bronze or other suitable wire 0.086 mm (0.0034 in) thick, so the openings between adjacent wires are 0.125 mm (0.0049 in) each way, about 120 wires to the inch. Ours: bronze wire. Not given: how it is woven.

اس مرحلے کے لیے مواد:

کانسی کی تارکانسی کی تار1 warp and shoot wires

درکار اوزار:

تار کی جالی بُننے کی کھڈیتار کی جالی بُننے کی کھڈی
2

Make the frame

Make a circular frame about 20 cm (8 in) across, with about 5 cm (2 in), or 2.5 cm (1 in), between its top and the cloth. Ours: brass strip. Not given: the frame metal.

اس مرحلے کے لیے مواد:

پیتل کی پٹیپیتل کی پٹی1 frame

درکار اوزار:

چادر کاٹنے کی قینچیچادر کاٹنے کی قینچی
ٹانکا لگانے کی سلاخٹانکا لگانے کی سلاخ
3

Mount the cloth

Mount the cloth on the frame without distorting it. Fill the joint between cloth and frame smoothly with solder, so the material being sieved cannot catch in it.

اس مرحلے کے لیے مواد:

ٹن-سیسے کا ٹانکہٹن-سیسے کا ٹانکہ1 joint
فلکسفلکس1 joint

درکار اوزار:

ٹانکا لگانے کی سلاخٹانکا لگانے کی سلاخ
4

Check it against the tolerances

Measure the warp and shoot wires separately. Their average opening must be 0.125 mm within ±6 %, their average diameter 0.086 mm within −15 to +35 %, and no opening may exceed 0.125 mm by more than 40 %. Reject a sieve with punctures, loose or wavy cloth, poor soldering, or too many large openings.

درکار اوزار:

مائیکرو میٹرمائیکرو میٹر
عدسیعدسی

مواد

4
  • 1 warp and shoot wires
    پلیس ہولڈر
  • پلیس ہولڈر
  • پلیس ہولڈر
  • 1 joint
    پلیس ہولڈر

درکار اوزار

5

CC0 پبلک ڈومین

یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔

میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔

بحث

(0)

لاگ ان بحث میں شامل ہونے کے لیے

تبصرے لوڈ ہو رہے ہیں...