فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
سبز مستقبل
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات

Carving a Slit Drum — The Hollow Log That Talks
Carve a slit drum: a hollow log with an H-shaped slit that leaves two wooden tongues of different pitch, struck with mallets. Hollow the log through the slit, cut and tune the two tongues, and play. A serious maker build in the slit idiophone — a skinless drum that speaks in two or more tones, used to send messages across the forest.
درمیانہ
Several hours over a couple of sessions
ہدایات
1
1
A drum with no skin
A drum with no skin
A slit drum is a hollow log with a long slit cut in the top. The slit leaves flaps of wood — tongues — and striking a tongue makes it ring. Cut two tongues of different size and you have a drum that speaks in two tones, with no skin at all.
2
2
Get a solid block or log
Get a solid block or log
Start from a solid, dense, well-dried block or short log — the harder the wood, the brighter and longer the ring. Flatten the top face where the slit will go.
اس مرحلے کے لیے مواد:
Bloodwood Board1 pieceدرکار اوزار:
Hacksaw3
3
Cut the H-slit
Cut the H-slit
Cut a long slot down the top, then a short cross-cut at each end — an 'H' or 'I' shape. This leaves TWO tongues of wood between the arms of the H, one on each side of the central slit.
درکار اوزار:
Chisel Set4
4
Hollow it out
Hollow it out
Working THROUGH the slit, chisel out the inside of the log to leave a large hollow chamber under the tongues, with the tongues and walls left fairly thin. This cavity is the resonator that gives the drum its boom.
5
5
Shape two different tongues
Shape two different tongues
Make the two tongues DIFFERENT — cut one longer or thinner than the other. The bigger, thinner tongue rings low ('male'); the shorter, thicker one rings high ('female'). Two clear pitches is the whole point.
درکار اوزار:
Sloyd Carving Knife6
6
Tune the tongues
Tune the tongues
Tune each tongue by shaving wood: thin the UNDERSIDE (or lengthen the slit) to lower its note, or trim the tip to raise it — exactly how a xylophone bar or a marimba key is tuned.
7
7
Play with mallets
Play with mallets
Strike the tongues with two soft mallets — the low tongue and the high tongue give a two-tone pattern. In much of Africa, the Pacific and the Americas these two tones were used to send messages and call the village across long distances.
اس مرحلے کے لیے مواد:
Dowel Rod1 piece8
8
Compendium — the slit idiophone
Compendium — the slit idiophone
The slit drum is misnamed: it is not really a drum at all. A true drum (a membranophone like the hide drum or the djembe) makes its sound on a stretched SKIN; the slit drum has no skin — the sound comes from the WOOD itself vibrating, which makes it an idiophone, the same family as the xylophone, the balafon and the gamelan's metal bars. Each tongue is a little bar of wood fixed along one edge and free along the slit, so when you strike it it flexes and rings, and just like any tuned bar its pitch rises when it is shorter, thicker or stiffer and falls when it is longer or thinner — which is why you tune it by shaving wood from the underside (lower) or the tip (higher). What the hollow log adds is a big enclosed air cavity beneath the tongues that acts as a resonator, swelling and deepening the note the way a marimba's tube or a balafon's gourd does, and the long slit lets that boom escape. Because you can cut two, three or more tongues of different pitch in one log, the slit drum can carry not just rhythm but the actual up-and-down TONES of speech — in West and Central Africa and across the Pacific the big slit gongs were true 'talking drums', drumming the melody of spoken phrases to send news for miles. It is one of the most widespread instruments on Earth, invented independently wherever people had big trees and something to say.
You can swap these in
Can't get one of the materials? Swap it for an equivalent — these work just as well.
- Instead of Sloyd Carving Knife, try:
Blunt Collection Knife
Gilder's Knife
Knife
Sharp Cinnamon Knife
Sharp Knife (faca)
Sharp Pruning Knife
Small Trimming Knife
Sharp Knife
Steel Pocket Knife - Instead of Chisel Set, try:
Thin Flat Chisel (10mm)
Cold Chisel (flat, 25mm)
Copper Chisel
متعلقہ بلیو پرنٹ
یہ بلیو پرنٹ علم بانٹتے ہیں — تکنیک، مواد یا اصول
Related blueprints
Other builds that share materials, tools, or techniques with this one.

Carving a Wooden Bowl by Ember Burning — Hollowing Without Metal Toolswoodworking

Carving a Spoon from Start to Finish — Greenwood Spoon CarvingWoodworking

Carving a Wooden Bowl with an Adze — Hollowing from a Green Wood BlankWoodworking

Casting a Bronze Sickle — The Harvesting Tool That Fed CivilisationMetalworking

Mordanting Wool with Alum — The Foundation of Natural Dyeingtextiles

Carving a Wooden Spoon by Handcraft/woodworking/wood-carving
CC0 پبلک ڈومین
یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔
میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔