تعاون
فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات

Barium Ferrite Disc Magnet: 1 mol BaCO3 to 3 mol Iron Oxide, 1330 °C (Went, Philips 1956, Ex. 2)
A barium ferrite with more iron oxide: 1 mol barium carbonate to 3 mol, made as in Example 1 and passed through a 1330 °C furnace in 20 minutes. Went's rod held 1,510 gauss with a coercive force of 2,080 oersted.
Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 2. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
اعلیٰ
2 days
ہدایات
1
1
Weigh barium carbonate and iron oxide
Weigh barium carbonate and iron oxide
Weigh 201.1 g barium carbonate (1 mol) and 480.6 g ferric oxide (3 mol). Barium carbonate is poisonous if swallowed: gloves and a dust respirator.
اس مرحلے کے لیے مواد:
بیریم کاربونیٹ (وِدھرائٹ)201.1 گرام
فیرک آکسائیڈ480.6 گرامدرکار اوزار:
پلڑوں والی ترازو
ربڑ کے دستانے
P100 سانس محافظ2
2
Mill with alcohol 13.5 hours, dry and sieve
Mill with alcohol 13.5 hours, dry and sieve
Grind the mixture with alcohol in a ball mill for 13.5 hours, then dry it and sieve it.
درکار اوزار:
لوہے کی بال مل
ایتھینول - تجربہ گاہ درجہ، 95 %
سُکھانے کا تنور
چھلنی3
3
Knead with a binder and form
Knead with a binder and form
Mix 300 g of the powder with a binder such as polyvinyl alcohol (Went names it or nitrocellulose) into a kneadable mass. The patent extrudes rods about 3 mm across; ours: press discs at 1.5 tonnes per cm², as in its other examples. Dry them in air for about 24 hours.
درکار اوزار:
پولی وینائل الکحل پاؤڈر
ہائیڈرولک پریس
ڈسک دبانے کا سانچا
سُکھانے کا تنور4
4
Pass through a 1330 °C zone in 20 minutes
Pass through a 1330 °C zone in 20 minutes
Sinter in air at 1330 °C by passing the pieces through a 10 cm hot zone at 5 mm per minute: 20 minutes in the heat.
درکار اوزار:
نلکی بھٹی
حرارت روک دستانے5
5
Magnetise the discs
Magnetise the discs
The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.
درکار اوزار:
برقی مقناطیس
قطب نمامواد
2- 201.1 گرامپلیس ہولڈر
- 480.6 گرامپلیس ہولڈر
درکار اوزار
14- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
یہ بلوپرنٹ بناتا ہے
متعلقہ بلیو پرنٹ
یہ بلیو پرنٹ علم بانٹتے ہیں — تکنیک، مواد یا اصول
CC0 پبلک ڈومین
یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔
میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔

