تعاون
فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات
Barium Ferrite Disc Magnet: 0.4 mol BaCO3 to 3.2 mol Iron Oxide, 1330 °C (Went, Philips 1956, Ex. 5)
Charlie

تخلیق کار

Charlie

28. اکتوبر 2026DE
6
0
0
0
0

Barium Ferrite Disc Magnet: 0.4 mol BaCO3 to 3.2 mol Iron Oxide, 1330 °C (Went, Philips 1956, Ex. 5)

A barium ferrite with 0.4 mol barium carbonate to 3.2 mol iron oxide, made as in Example 4 and passed through a 1330 °C furnace in 20 minutes. Went's rod held 1,220 gauss with a coercive force of 1,900 oersted. Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 5. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
اعلیٰ
2 days

ہدایات

1

Weigh barium carbonate and iron oxide

Weigh 79.4 g barium carbonate (0.4 mol) and 516.4 g ferric oxide (3.2 mol). Barium carbonate is poisonous if swallowed: gloves and a dust respirator.

اس مرحلے کے لیے مواد:

بیریم کاربونیٹ (وِدھرائٹ)بیریم کاربونیٹ (وِدھرائٹ)79.4 گرام
فیرک آکسائیڈفیرک آکسائیڈ516.4 گرام

درکار اوزار:

پلڑوں والی ترازوپلڑوں والی ترازو
ربڑ کے دستانےربڑ کے دستانے
P100 سانس محافظP100 سانس محافظ
2

Mill with alcohol 15.5 hours, dry and sieve

As in Example 4: grind the mixture with alcohol in a ball mill for 15.5 hours, then dry it and sieve it.

درکار اوزار:

لوہے کی بال مللوہے کی بال مل
ایتھینول - تجربہ گاہ درجہ، 95 %ایتھینول - تجربہ گاہ درجہ، 95 %
سُکھانے کا تنورسُکھانے کا تنور
چھلنیچھلنی
3

Knead with a binder and form

Mix 300 g of the powder with a binder such as polyvinyl alcohol (Went names it or nitrocellulose) into a kneadable mass. The patent extrudes rods about 3 mm across; ours: press discs at 1.5 tonnes per cm², as in its other examples. Dry them in air for about 24 hours.

درکار اوزار:

پولی وینائل الکحل پاؤڈرپولی وینائل الکحل پاؤڈر
ہائیڈرولک پریسہائیڈرولک پریس
ڈسک دبانے کا سانچاڈسک دبانے کا سانچا
سُکھانے کا تنورسُکھانے کا تنور
4

Pass through a 1330 °C zone in 20 minutes

Sinter in air at 1330 °C by passing the pieces through a 10 cm hot zone at 5 mm per minute: 20 minutes in the heat.

درکار اوزار:

نلکی بھٹینلکی بھٹی
حرارت روک دستانےحرارت روک دستانے
5

Magnetise the discs

The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.

درکار اوزار:

برقی مقناطیسبرقی مقناطیس
قطب نماقطب نما

مواد

2

درکار اوزار

14

یہ بلوپرنٹ بناتا ہے

متعلقہ بلیو پرنٹ

یہ بلیو پرنٹ علم بانٹتے ہیں — تکنیک، مواد یا اصول

CC0 پبلک ڈومین

یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔

میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔

بحث

(0)

لاگ ان بحث میں شامل ہونے کے لیے

تبصرے لوڈ ہو رہے ہیں...