تعاون
فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات
Brazing Torch: a Pressure-Tank Gasoline or Kerosene Torch (Shop Notes, 1909)
Forge

تخلیق کار

Forge

4. نومبر 2026NO
9
0
0
0
0

Brazing Torch: a Pressure-Tank Gasoline or Kerosene Torch (Shop Notes, 1909)

A shop brazing and tempering torch: a wall-hung pipe tank of gasoline or kerosene pumped up with a bicycle pump, feeding a 1/8 in pipe whose end is coiled round a short 1 in pipe; the flame heats the coil, the oil turns to gas, and it blasts out through a pinhole cap. Two burners on a tee give a bigger heat. Source: Popular Mechanics Shop Notes for 1909, pp. 861-862. Picture: the article's drawing.
درمیانہ
Unknown

ہدایات

1

Make the tank

Cap both ends of a 2 in pipe 20 in long. Drill three holes in the top cap: one for the rubber tube from a bicycle pump, one for a steam gauge, and one with a screw plug for filling with fuel oil.

اس مرحلے کے لیے مواد:

فولادی پائپ (موٹی دیوار، چُوڑی دار سرے)فولادی پائپ (موٹی دیوار، چُوڑی دار سرے)1 2 in x 20 in
چُوڑی دار پائپ فٹنگچُوڑی دار پائپ فٹنگ3 two caps, plug
دباؤ پیمادباؤ پیما1 ٹکڑا
ربڑ کی نلیربڑ کی نلی1 ٹکڑا

درکار اوزار:

ہاتھ کا برماہاتھ کا برما
چُوڑی کاٹنے کا سیٹچُوڑی کاٹنے کا سیٹ
پائپ رنچپائپ رنچ
سائیکل کا فرشی پمپسائیکل کا فرشی پمپ
2

Coil the burner

Drill the bottom cap and connect a 1/8 in pipe D, any length, with a globe valve in it to set and shut off the oil. Fill the last 10 in of the pipe with lead, coil it round a 1 in pipe F 6 in long, and turn the end out to take two elbows and a short nipple; then melt the lead out. Drill a small hole in the centre of a 1/8 in cap and fit it on the end (E) so the hole lines up with the centre of pipe F.

اس مرحلے کے لیے مواد:

فولادی پائپ (موٹی دیوار، چُوڑی دار سرے)فولادی پائپ (موٹی دیوار، چُوڑی دار سرے)1 1/8 in, and 1 in x 6 in
چُوڑی دار پائپ فٹنگچُوڑی دار پائپ فٹنگ4 two elbows, nipple, 1/8 in cap
گول والوگول والو1 ٹکڑا

درکار اوزار:

سیسہسیسہ
سوراخ دار کفگیرسوراخ دار کفگیر
لوہار کی بھٹیلوہار کی بھٹی
ہاتھ کا برماہاتھ کا برما
پائپ رنچپائپ رنچ
3

Start the burner

Hang a little cup holding three or four teaspoonfuls of oil just below the coil and light it to heat the coil; then pump up the tank and open the globe valve. For more heat connect two burners on a tee so their blasts meet.

درکار اوزار:

مٹی کا تیلمٹی کا تیل
سائیکل کا فرشی پمپسائیکل کا فرشی پمپ

مواد

5

درکار اوزار

8

CC0 پبلک ڈومین

یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔

میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔

بحث

(0)

لاگ ان بحث میں شامل ہونے کے لیے

تبصرے لوڈ ہو رہے ہیں...