فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات
Carbon Resistance Strip: Carbon and Phenolic Resin in Acetone, Cured on Semi-Cured Phenolic Sheet
Ed

تخلیق کار

Ed

21. اکتوبر 2026FI
0
0
0
0
0

Carbon Resistance Strip: Carbon and Phenolic Resin in Acetone, Cured on Semi-Cured Phenolic Sheet

Podolsky (Wirt Company, US 2,060,114, 1936) bonded the carbon film into its base: the phenolic sheet is only half cured, the coating carries the same kind of resin, and its solvent (acetone) softens the sheet's surface. Heated calender rolls then finish the cure of sheet and coating together, so the track is hard, does not rub off and lasts. Cut across, the sheet gives resistance strips for a variable resistor. The picture: our diagram.
درمیانہ
1 day

ہدایات

1

Mix 21 carbon, 26 resin, 53 solvent

Make a solution of 21 % carbon, 26 % phenol-formaldehyde resin and 53 % acetone. The patent says the exact proportions are not essential; this is its example.

اس مرحلے کے لیے مواد:

کاربنکاربن21 parts
مائع بیکیلائٹ (فینول-فارملڈیہائیڈ تکثیفی حاصل)مائع بیکیلائٹ (فینول-فارملڈیہائیڈ تکثیفی حاصل)26 parts

درکار اوزار:

ایسیٹونایسیٹون
پلڑوں والی ترازوپلڑوں والی ترازو
شیشے کا بیکرشیشے کا بیکر
ہلانے کا آلہہلانے کا آلہ
پورے چہرے کا ماسکپورے چہرے کا ماسک
ربڑ کے دستانےربڑ کے دستانے
2

Coat the semi-cured sheet

Use a phenolic sheet whose cure was stopped before it fully hardened. A roller turning in a pan of the solution coats its underside.

اس مرحلے کے لیے مواد:

نیم پختہ فینولک شیٹنیم پختہ فینولک شیٹ1 ٹکڑا

درکار اوزار:

ڈبو کر پرت چڑھانے والے رولروں کا جوڑاڈبو کر پرت چڑھانے والے رولروں کا جوڑا
پورے چہرے کا ماسکپورے چہرے کا ماسک
ربڑ کے دستانےربڑ کے دستانے
3

Cure between calender rolls at 350 °F

Pass the coated sheet between calender rolls heated to about 350 °F (177 °C). This finishes the cure and bonds the coating to the sheet. The patent sometimes calenders it again to burnish the surface.

درکار اوزار:

گرم کیلنڈر رولزگرم کیلنڈر رولز
حرارت روک دستانےحرارت روک دستانے
4

Cut into strips

Cut the sheet across into strips of the width wanted. Ours: tin snips.

درکار اوزار:

چادر کاٹنے کی قینچیچادر کاٹنے کی قینچی
ربڑ کے دستانےربڑ کے دستانے

مواد

3

درکار اوزار

10

CC0 پبلک ڈومین

یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔

میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔

بحث

(0)

لاگ ان بحث میں شامل ہونے کے لیے

تبصرے لوڈ ہو رہے ہیں...