تعاون
فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات

Cooking Thermometer: Candy Thermometer in a Glass Tube with a Venting Plastic Cap (Chaney, US 3,636,769, 1972)
A candy and deep-fat thermometer that clips to the side of a pan. A glass thermometer on a printed scale card sits inside a protective glass tube, so it never touches the candy. The top of the tube is closed by a polyethylene cap that seals in normal use but softens when the whole thermometer is heated far too hot, as in an oven, so the air inside escapes instead of bursting the tube.
Result: a pan-side cooking thermometer that cannot explode if overheated.
Source: J. L. Chaney, US 3,636,769 (1972). Unknown: the scale range, sizes and several materials. Picture: the patent drawing.
درمیانہ
Unknown
ہدایات
1
1
Mount the thermometer on its scale
Mount the thermometer on its scale
Fasten a glass thermometer tube to a graduated scale card with small fasteners, the bulb at the bottom. The patent's card is marked with cooking points such as soft ball, hard ball, soft crack, hard crack, fish, fowl, potatoes and doughnuts. Fix a disk on top of the card to keep it centred in the outer tube. Not given: the range, the card and fastener materials.
اس مرحلے کے لیے مواد:
تجربہ گاہی تھرمامیٹر1 thermometer tube
نامعلوم مادہ1 scale card, disk
نامعلوم دھات1 fastenersدرکار اوزار:
نامعلوم پیمائش2
2
Enclose it in the protective tube
Enclose it in the protective tube
Slide the card and thermometer into a glass protective tube, open at the top, so the bulb reaches the lower end and touches a metal cap there to pass on the heat. Not given: the tube size, the metal of the end cap, how the cap is joined to the tube.
اس مرحلے کے لیے مواد:
شیشے کی نلی1 protective tube
نامعلوم دھات1 end capدرکار اوزار:
نامعلوم پیمائش3
3
Fit the venting cap
Fit the venting cap
Close the open top with a cup-shaped cap of a thermoplastic such as polyethylene, a friction fit that seals out dirt. Polyethylene softens at about 180 °F and melts near 250 °F: if the thermometer is heated in an oven to 400-550 °F, the air inside would reach 12-14 psi, but the cap distorts first and lets it out. Do not use rubber or a thermosetting plastic, which does not vent. Ours: LDPE.
اس مرحلے کے لیے مواد:
LDPE کے دانے1 capدرکار اوزار:
نامعلوم پیمائش4
4
Fit the pan clip and use it
Fit the pan clip and use it
Slide a spring clip onto the outside of the tube; its spring arm holds the thermometer upright over the edge of the pan. Clip it on with the bulb end in the candy or fat and read the scale; it also serves for deep frying. Ours: spring steel wire.
اس مرحلے کے لیے مواد:
کمانی فولاد کا تار1 clipدرکار اوزار:
گول منہ والا پلاسمواد
6- 1 thermometer tubeپلیس ہولڈر
- 1 scale card, diskپلیس ہولڈر
- 1 end capپلیس ہولڈر
- 1 protective tubeپلیس ہولڈر
- 1 capپلیس ہولڈر
- 1 clipپلیس ہولڈر
درکار اوزار
2- پلیس ہولڈر
- پلیس ہولڈر
منسلک بلیو پرنٹ مواد

خطرناک
10% انتساب
Liquid-in-Glass Thermometer: Bulb, Fill, Seal and Scale
Penny کی طرف سے
شیشے کا کام
39
0
0
0
1
0

خطرناک
10% انتساب
LDPE Pellets: Ethylene Polymerised at 1500 Atmospheres with a Trace of Oxygen
Charlie کی طرف سے
صنعتی
13
0
0
0
2
0

10% انتساب
Spring Steel Strip and Wire, Hardened and Tempered
Forge کی طرف سے
دھات کاری
47
0
0
0
5
0
یہ بلوپرنٹ بناتا ہے
CC0 پبلک ڈومین
یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔
میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔
