فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات
Multi-Conductor Cable: Cotton-Covered, Waxed and Twisted
Penny

تخلیق کار

Penny

14. اکتوبر 2026DK
15
0
0
0
0

Multi-Conductor Cable: Cotton-Covered, Waxed and Twisted

A cable of several insulated wires in one bundle, such as the four leads of a strain-gauge bridge. Each copper wire is wrapped in cotton thread and soaked in beeswax, then the wires are twisted together and covered again.
نیا سیکھنے والا
An afternoon

ہدایات

1

Cut the conductors

Cut one copper wire per conductor (four for a bridge), a little longer than the cable.

اس مرحلے کے لیے مواد:

تانبے کا تارتانبے کا تار4 length

درکار اوزار:

تار کا غلاف اتارنے کا اوزارتار کا غلاف اتارنے کا اوزار
2

Wrap each wire in cotton

Clamp one end in the vise and the other in the hand drill's chuck, keeping it taut. Wind cotton thread on in a close spiral with no gaps, then a second layer the opposite way.

اس مرحلے کے لیے مواد:

سوتی دھاگہسوتی دھاگہ1 as required

درکار اوزار:

میز کا شکنجہمیز کا شکنجہ
ہاتھ کا برماہاتھ کا برما
قینچیقینچی
3

Soak in beeswax

Melt beeswax in a double boiler and draw each covered wire slowly through it. Wipe off the excess and let it set.

اس مرحلے کے لیے مواد:

مومموم1 as required

درکار اوزار:

دوہری دیگچیدوہری دیگچی
گرم پلیٹگرم پلیٹ
4

Twist them together

Lay the covered wires side by side, clamp one end and twist them together evenly with the drill.

درکار اوزار:

میز کا شکنجہمیز کا شکنجہ
ہاتھ کا برماہاتھ کا برما
5

Cover the bundle

Wind an outer layer of cotton over the twisted bundle and wax it again.

اس مرحلے کے لیے مواد:

سوتی دھاگہسوتی دھاگہ1 as required
مومموم1 as required

درکار اوزار:

میز کا شکنجہمیز کا شکنجہ
دوہری دیگچیدوہری دیگچی
گرم پلیٹگرم پلیٹ
6

Test it

Strip the ends. With a multimeter check each wire end to end, and check that no two wires touch.

درکار اوزار:

تار کا غلاف اتارنے کا اوزارتار کا غلاف اتارنے کا اوزار
ملٹی میٹرملٹی میٹر
7

Limits

Cotton insulation is only good for low temperatures, up to about 105 °C (Wikipedia, Magnet wire), and for dry places and low voltages such as instrument leads. The method is general workshop practice, ours.

مواد

3
  • پلیس ہولڈر
  • 2 as required
    پلیس ہولڈر
  • 2 as required
    پلیس ہولڈر

درکار اوزار

7

CC0 پبلک ڈومین

یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔

میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔

بحث

(0)

لاگ ان بحث میں شامل ہونے کے لیے

تبصرے لوڈ ہو رہے ہیں...