فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات
Plain-Weave Cotton Cloth on a Rigid Heddle Loom
Tex

تخلیق کار

Tex

11. اکتوبر 2026FO
34
0
0
0
0

Plain-Weave Cotton Cloth on a Rigid Heddle Loom

Plain weave is the simplest cloth: each crosswise thread goes over one lengthwise thread and under the next, and back the other way on the next pass. A rigid heddle loom does the lifting: one bar of slots and holes raises or lowers every other warp thread at once. The thread is the 2-ply cotton from the hand-spinning blueprint, used for both warp and weft.
درمیانہ
About a week of evenings

ہدایات

1

The thread

Spinning and plying the cotton thread used here.
2

Find the sett

Wrap the thread round a ruler, touching but not crowded, and count the wraps in 2.5 cm. For plain weave set the warp at about half that many threads per 2.5 cm, and choose the heddle to match.

درکار اوزار:

پیمانہپیمانہ
3

Measure the warp

On the warping board wind as many threads as the width times the sett, each the cloth's length plus about 50 cm for tying on and loom waste.

اس مرحلے کے لیے مواد:

سوتی دھاگہسوتی دھاگہ150 گرام

درکار اوزار:

تانا لپیٹنے کا تختہتانا لپیٹنے کا تختہ
فیتہ پیمافیتہ پیما
4

Thread the heddle

Thread one warp end through each slot and each hole in turn, tie the ends to the back beam, wind on under even tension and tie on at the front.

درکار اوزار:

سخت کنگھی والی کھڈیسخت کنگھی والی کھڈی
5

Weave

Raise the heddle, pass the shuttle through, beat the weft gently with the heddle; lower the heddle, pass back, beat. Leave the weft at a slant across the shed so the edges do not pull in.

اس مرحلے کے لیے مواد:

سوتی دھاگہسوتی دھاگہ120 گرام

درکار اوزار:

سخت کنگھی والی کھڈیسخت کنگھی والی کھڈی
نال (بنائی کی)نال (بنائی کی)
6

Cut off and secure

Cut the cloth off the loom and knot or hem both ends so the weft cannot slip off.

درکار اوزار:

کپڑے کی قینچیکپڑے کی قینچی
7

Wash to finish

Wash the cloth in hot water, dry it, and measure it: the threads relax and close up. Note how much it shrank for the next warp.

درکار اوزار:

فیتہ پیمافیتہ پیما
8

Troubleshooting

Plain weave troubleshooting.

Flow

Loading...

مواد

1

درکار اوزار

6

متعلقہ بلیو پرنٹ

یہ بلیو پرنٹ علم بانٹتے ہیں — تکنیک، مواد یا اصول

CC0 پبلک ڈومین

یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔

میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔

بحث

(0)

لاگ ان بحث میں شامل ہونے کے لیے

تبصرے لوڈ ہو رہے ہیں...