تعاون
فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات

Leather Strop: a Beech Paddle Faced with Leather on Both Sides
A strop is a strip of leather that straightens the fine edge of a blade after the stone; with an abrasive such as iron oxide rubbed in, it also polishes a little. Strops hang, sit as blocks, or come as hand-held paddles. Glue leather to both faces of a beech paddle, smooth side out on one face and rough side out on the other, and charge the rough side with red iron oxide.
The picture: our diagram, the paddle from above and in section, with a blade drawn spine first.
نیا سیکھنے والا
An afternoon
ہدایات
1
1
Shape the paddle
Shape the paddle
Saw and plane a beech paddle about 40 × 6 × 1.5 cm with a 10 cm handle (our size), and round the handle with the spokeshave.
اس مرحلے کے لیے مواد:
بیچ کی عمارتی لکڑی1 ٹکڑادرکار اوزار:
ہاتھ کی آری
رندہ
دو دستوں والا رندہ2
2
Cut the leather
Cut the leather
Cut two strips of leather to the blade area of the paddle.
اس مرحلے کے لیے مواد:
نباتاتی دباغت کا چمڑا1 ٹکڑادرکار اوزار:
یوٹیلٹی چاقو
پیمانہ3
3
Glue them on
Glue them on
Glue one strip smooth (grain) side out on one face and the other rough (flesh) side out on the other face with hot hide glue, and clamp flat until set.
اس مرحلے کے لیے مواد:
کھال کا سریش0.05 کلوگرامدرکار اوزار:
سی شکل کا کلیمپ
بڑی دیگ
شیشے کا بیکر4
4
Charge the rough side
Charge the rough side
Rub red iron oxide (red ochre) into the rough side. Strop by drawing the blade spine first, edge trailing (our practice), with light, even strokes on each side.
اس مرحلے کے لیے مواد:
سرخ گیرو رنگ دانہ0.01 کلوگرامدرکار اوزار:
یوٹیلٹی چاقو5
5
Leather for the paddle
Leather for the paddle
Jupyter نوٹ بک لوڈ ہو رہی ہے…
مواد
4- 1 ٹکڑاپلیس ہولڈر
- 1 ٹکڑاپلیس ہولڈر
- 0.05 کلوگرامپلیس ہولڈر
- 0.01 کلوگرامپلیس ہولڈر
یہ بلوپرنٹ بناتا ہے
متعلقہ بلیو پرنٹ
یہ بلیو پرنٹ علم بانٹتے ہیں — تکنیک، مواد یا اصول
CC0 پبلک ڈومین
یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔
میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔

