فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
سبز مستقبل
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات

Building a Morin Khuur — The Mongolian Horse-Head Fiddle
Build a morin khuur: Mongolia's upright two-string bowed fiddle, crowned with a carved horse's head. Its two strings and its bow are all made of horsehair, over a hide-faced box, with no fingerboard — you stop the strings from the side and slide like a horse's whinny. A serious maker build in the bowed string and the horsehair voice of the steppe.
درمیانہ
Several hours over a few sessions
ہدایات
1
1
The voice of the steppe
The voice of the steppe
The morin khuur is Mongolia's horse-head fiddle: an upright two-string bowed fiddle whose strings and bow are all horsehair, over a hide-faced box, topped with a carved horse's head.
2
2
Build the sound-box
Build the sound-box
Build a trapezoidal wooden box, a little wider at the bottom than the top, for the sound-body. Leave the front open to take the skin.
اس مرحلے کے لیے مواد:
Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)1 piece
PVA Wood Glue1 pieceدرکار اوزار:
Hacksaw3
3
Face the front with hide
Face the front with hide
Soak rawhide and stretch it drum-tight over the open front of the box, glue and lash it, and let it dry hard. This skin radiates the sound like a drumhead. (A thin wooden soundboard also works.)
اس مرحلے کے لیے مواد:
Rawhide1 piece
PVA Wood Glue1 piece4
4
Fit the neck
Fit the neck
Fix a long neck rising straight up from the top of the box, tall enough to hold the strings clear of the skin.
اس مرحلے کے لیے مواد:
Dowel Rod1 piece
PVA Wood Glue1 piece5
5
Carve the horse's head
Carve the horse's head
Carve a horse's head at the very top of the neck. This emblem gives the instrument its name and, the herders say, its spirit.
درکار اوزار:
Sloyd Carving Knife6
6
Fit two tuning pegs
Fit two tuning pegs
Bore two holes in the neck just below the head and fit a friction tuning peg into each.
اس مرحلے کے لیے مواد:
Tuning Pegs2 pieceدرکار اوزار:
Awl7
7
Twist the horsehair strings
Twist the horsehair strings
Each string is a whole BUNDLE of horsehair twisted together — a thicker bundle of about 130 hairs for the low string, a thinner one of about 105 for the high string.
اس مرحلے کے لیے مواد:
Bow Hair (Horsehair)1 piece8
8
String it over a bridge
String it over a bridge
Carve a small bridge and stand it on the middle of the hide. Tie each horsehair string at the base, run it up over the bridge, and wind it onto a peg.
درکار اوزار:
Sloyd Carving Knife9
9
Tune the two strings
Tune the two strings
Tune the two strings a fourth or a fifth apart. Twist the pegs slowly — horsehair strings stretch, so give them time to settle.
10
10
Make the bow
Make the bow
String a springy stick with a ribbon of horsehair to make the bow, and rub it well with pine rosin so it grips.
اس مرحلے کے لیے مواد:
Curved Branch (Bow)1 piece
Bow Hair (Horsehair)1 piece11
11
Bow and side-stop
Bow and side-stop
Hold the fiddle upright on your lap and draw the bow across a string. There is no fingerboard: stop the strings from the SIDE with your fingertips and nails, sliding to bend the note.
12
12
Make it whinny
Make it whinny
Slide smoothly between notes and let the horsehair-on-horsehair rasp sing. The morin khuur is famous for imitating a horse's neigh and carrying Mongolian long-song.
13
13
Compendium — horsehair, hide and the steppe
Compendium — horsehair, hide and the steppe
The morin khuur is a bowed fiddle, so it sings by the same stick-slip friction as the erhu and the violin: the rosined bow grabs a string, drags it until its tension tears it free, and the string snaps back to be caught again hundreds of times a second — the Helmholtz motion that keeps a bowed note singing for as long as you draw the bow. But almost everything about this fiddle is made of horse. Its two strings are not gut or metal but whole bundles of horsehair twisted together — roughly 130 hairs for the thick 'male' string and 105 for the thin 'female' one — and the bow is horsehair too, so hair bows against hair, giving the morin khuur its soft, breathy, whinnying tone. The sound-box is traditionally faced with stretched hide that radiates the strings' vibration like a drumhead, though many modern makers now use a thin wooden soundboard. And there is no fingerboard: the player stops the strings from the side, with fingertips and nails, so the pitch slides smoothly — which is why the morin khuur can imitate a horse's neigh and carry the long, gliding notes of Mongolian long-song and throat-singing. Its close cousin is the Chinese erhu, and its wider family is the spike-fiddles of the whole Eurasian steppe. Named for the carved horse's head that crowns it, the morin khuur is a national emblem of Mongolia, recognised by UNESCO as a masterpiece of humanity's living heritage.
مواد
7- پلیس ہولڈر
- 3 pieceپلیس ہولڈر
- 2 pieceپلیس ہولڈر
- 2 pieceپلیس ہولڈر
- 1 pieceپلیس ہولڈر
You can swap these in
Can't get one of the materials? Swap it for an equivalent — these work just as well.
- Instead of Sloyd Carving Knife, try:
Blunt Collection Knife
Gilder's Knife
Knife
Sharp Cinnamon Knife
Sharp Knife (faca)
Sharp Pruning Knife
Small Trimming Knife - Instead of PVA Wood Glue, try:
Polyurethane Glue
Wood Glue - Instead of Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack), try:
CDX Softwood Plywood
Fire-Rated Plywood
Oak Hardwood Plywood
متعلقہ بلیو پرنٹ
یہ بلیو پرنٹ علم بانٹتے ہیں — تکنیک، مواد یا اصول
Related blueprints
Other builds that share materials, tools, or techniques with this one.

Building a Nyckelharpa — The Swedish Keyed Fiddle

Building an Arab Kamal — The Indian Ocean Navigator's Latitude FinderPhysics & Astronomy

Building a Lyre of Ur — The Sumerian Bull Lyre

Building an Erhu — The Chinese Two-String Bowed Fiddle

Building a Janggu — The Korean Hourglass Drum

Building a Santur — The Persian Hammered Dulcimer
CC0 پبلک ڈومین
یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔
میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔