فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات
Riven Hardwood Dowels with a Dowel Plate
Woody

تخلیق کار

Woody

11. اکتوبر 2026NO
40
0
0
0
0

Riven Hardwood Dowels with a Dowel Plate

A dowel split along the grain keeps every fibre running its full length, so it is stronger than one sawn across the grain. Split a straight log into sticks, dry them, rough them to eight sides and drive each through the holes of a steel dowel plate with a mallet: the sharp edge of each hole shaves the stick round. Dry dowels matter: wood shrinks as it dries, and a dry dowel takes up moisture from the glue and swells tight.
نیا سیکھنے والا
2 hours, plus drying

ہدایات

1

Cut a billet

Saw a 300 mm length from a straight, knot-free hardwood log such as oak, ash or hickory.

اس مرحلے کے لیے مواد:

سخت لکڑی کے لٹھے (بلوط، میپل، بیچ)سخت لکڑی کے لٹھے (بلوط، میپل، بیچ)1 ٹکڑا

درکار اوزار:

دو آدمیوں کی عرضی آریدو آدمیوں کی عرضی آری
فیتہ پیمافیتہ پیما
2

Riving, step by step

How to split along the grain with a froe and mallet.
3

Rive the sticks

Split the billet in halves, then halves again with the froe and mallet, until each stick is about 5 mm wider than the dowel you want.

درکار اوزار:

فرو (چیرنے والی چھری)فرو (چیرنے والی چھری)
لکڑی کا ہتھوڑالکڑی کا ہتھوڑا
4

Dry them

Leave the sticks indoors, spaced apart, for several weeks. They are ready when the moisture meter reads 6–8 %, or a little drier than the wood they will go into.

درکار اوزار:

سوئی والا لکڑی کا نمی پیماسوئی والا لکڑی کا نمی پیما
5

Rough to eight sides

Plane or pare each stick square, then take the corners off to eight sides, about 1 mm larger than the dowel. Chamfer one end to a blunt point.

درکار اوزار:

بلاک رندابلاک رندا
لکڑی کی رنداں کا سیٹلکڑی کی رنداں کا سیٹ
6

Drive through the plate

Clamp the dowel plate in the vise over a gap so the dowel can drop through. Start the chamfered end in the hole one size larger than you want and drive it through with the mallet; then the final hole.

درکار اوزار:

چول پلیٹچول پلیٹ
میز کا شکنجہمیز کا شکنجہ
لکڑی کا ہتھوڑالکڑی کا ہتھوڑا
حفاظتی عینکحفاظتی عینک
7

Check and cut

Measure the dowel with the caliper along its length. Saw to length and chamfer both ends.

درکار اوزار:

ڈیجیٹل ورنیئر کیلیپر ۶ انچڈیجیٹل ورنیئر کیلیپر ۶ انچ
دو آدمیوں کی عرضی آریدو آدمیوں کی عرضی آری
8

Keep them dry

Store the dowels in a jar with a lid until you use them, so they stay dry.

درکار اوزار:

ڈھکن والا شیشے کا مرتبانڈھکن والا شیشے کا مرتبان
9

Troubleshooting

Dowel plate troubleshooting.

Flow

Loading...

مواد

1

درکار اوزار

12

CC0 پبلک ڈومین

یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔

میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔

بحث

(0)

لاگ ان بحث میں شامل ہونے کے لیے

تبصرے لوڈ ہو رہے ہیں...