تعاون
فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات
55-Gallon Open-Head Steel Drum to ICC Specification 17H (1964)
Youblob · CC0
Forge

تخلیق کار

Forge

27. اکتوبر 2026NO
18
0
0
0
0

55-Gallon Open-Head Steel Drum to ICC Specification 17H (1964)

The open-top 55-gallon (208-litre) steel drum, built to the rule US railways and shippers used for single-trip removable-head drums: welded low-carbon steel body, three rolled hoops, a crowned bottom, and a lid clamped by a bolted ring over a gasket. Source: ICC Specification 17H, 49 CFR 78.118, Federal Register, 29 December 1964. The spec does not say how the bottom is joined. The litre figure, the gasket rubber and the machines are ours. Picture drawn by Youblob.
اعلیٰ
Production line

ہدایات

1

Cut low-carbon steel sheets

Use low-carbon steel for body and heads. For a 55-gallon drum: body 18 gauge, bottom head 18 gauge, removable head 14 gauge (16 gauge if the cover has one or more corrugations near its edge). 18 gauge is 0.0478 in nominal and at least 0.0428 in; 14 gauge 0.0747 in and at least 0.0677 in, measured at least 3/8 in from an edge.

اس مرحلے کے لیے مواد:

نرم فولاد کی چادرنرم فولاد کی چادر1 body, bottom and lid sheets

درکار اوزار:

بھاری دھاتی قینچیبھاری دھاتی قینچی
مائیکرو میٹرمائیکرو میٹر
2

Roll and weld the body

Roll the body sheet into a cylinder and weld the seam. The body seam must be welded.

درکار اوزار:

چادر موڑنے کے رولرچادر موڑنے کے رولر
ٹیوب سیم ویلڈرٹیوب سیم ویلڈر
3

Roll in three hoops

Roll or swage three hoops into the body, one of them near the top curl.

درکار اوزار:

ابھار ڈالنے کے رولرابھار ڈالنے کے رولر
4

Press crowned heads

Press the bottom head crowned (convex) by at least 3/8 in, not standing out beyond the level of the chime, and fit it to the body. The spec does not say how the bottom is joined.

درکار اوزار:

اسٹیمپنگ پریساسٹیمپنگ پریس
5

Make the bolted ring and gasket

Make the closing ring from 12-gauge steel with drop-forged lugs, one of them threaded, and a 5/8 in bolt and nut (for drums over 30 gallons). Fit a gasket under the lid: gaskets are required.

اس مرحلے کے لیے مواد:

نرم فولاد کی چادرنرم فولاد کی چادر1 12-gauge strip for the ring
نرم فولاد کی گول سلاخنرم فولاد کی گول سلاخ1 for the lugs
شش پہلو بولٹوں کا مجموعہشش پہلو بولٹوں کا مجموعہ1 5/8 in bolt
چھ گوشہ ڈھبریچھ گوشہ ڈھبری1 5/8 in
ربڑ کی چادرربڑ کی چادر1 gasket

درکار اوزار:

چادر موڑنے کے رولرچادر موڑنے کے رولر
فورجنگ ڈائیوں والا ڈراپ ہیمرفورجنگ ڈائیوں والا ڈراپ ہیمر
دستکاری کا چاقودستکاری کا چاقو
6

Check capacity and mark

The drum must hold at least 4 % more than its marked 55 gallons, and no more than 5 % more (or 4 % plus 1 quart, whichever is greater). Emboss the marks: ICC-17H, STC (single-trip container), the maker, and the gauges, capacity and year.

درکار اوزار:

اسٹیمپنگ پریساسٹیمپنگ پریس
7

Leak-test every drum

Test each drum by air pressure inside of at least 7 psi with its seams under water or covered with soapsuds or heavy oil. Reject leakers, or repair them the way they were made and test again.

اس مرحلے کے لیے مواد:

پانیپانی1 as required

درکار اوزار:

ہوا کا کمپریسرہوا کا کمپریسر
دباؤ پیمادباؤ پیما
8

Type tests every four months

On drums taken at random and closed as for use: drop one filled with water to 98 % from 4 ft onto concrete so it lands diagonally on the chime, and hold another at 15 psi water pressure for 5 minutes. None may leak.

اس مرحلے کے لیے مواد:

پانیپانی1 as required

درکار اوزار:

دباؤ پیمادباؤ پیما

مواد

6

درکار اوزار

10

CC0 پبلک ڈومین

یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔

میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔

بحث

(0)

لاگ ان بحث میں شامل ہونے کے لیے

تبصرے لوڈ ہو رہے ہیں...