فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات
The Compound Microscope
Penny

تخلیق کار

Penny

23. ستمبر 2026DK
23
0
0
0
0

The Compound Microscope

Leeuwenhoek's microscope, already published here, is a single tiny bead of glass held close to the eye. It beat everything else for a century and it has a hard ceiling: to magnify more you need a smaller bead, and a smaller bead means a shorter working distance and a darker, more painful image. Robert Hooke's answer, in the microscope behind *Micrographia* in 1665, was to use TWO lenses. A short-focus objective throws a real, enlarged image of the specimen inside the tube; the eyepiece then magnifies that image again. The magnifications multiply rather than adding, so two easy lenses beat one impossible one. That is the whole architecture of every microscope since. Build it from two lenses and a tube, measure what you actually got, and you will understand why the numbers printed on a modern objective mean what they do — and why the biggest one is not the most useful.
درمیانہ
1 day

ہدایات

1

Pick the two lenses by focal length, not by strength

Choose a short-focus lens for the objective — 10 to 20 mm — and a longer one for the eyepiece, around 25 to 50 mm. A lens sold as 'strong' tells you nothing you can calculate with; a focal length tells you everything. The objective's job is to form a real image a fixed distance up the tube, and the shorter its focal length the bigger that image. The eyepiece is simply a magnifying glass looking at that image, so a longer focal length there gives comfortable eye relief and a wider view.

اس مرحلے کے لیے مواد:

محدب عدسوں کا سیٹمحدب عدسوں کا سیٹ1 سیٹ
ہموار محدب عدسوں کا سیٹہموار محدب عدسوں کا سیٹ1 سیٹ

درکار اوزار:

پیمانہپیمانہ
2

Measure each focal length before you cut anything

Focus a distant window onto a sheet of paper with each lens and measure lens-to-paper. That distance IS the focal length, to within a millimetre or two. Do this even when the lens came labelled, because assorted lens sets are often mislabelled and every calculation in this build depends on these two numbers. Two minutes here saves rebuilding a tube that turns out to be the wrong length — which is the single most common way a home-built microscope ends up as a blurry disappointment.

اس مرحلے کے لیے مواد:

گتاگتا4 ٹکڑے

درکار اوزار:

پیمانہپیمانہ
3

Build the tube to the length the lenses demand

Make a tube whose length puts the objective's real image just inside the eyepiece's focal length. For a 15 mm objective and a 30 mm eyepiece with a 160 mm optical tube, that is roughly 160 mm plus both focal lengths. Line the inside with matt black card or black paint. An unlined cardboard tube scatters light off its walls straight into the eyepiece and washes the contrast out of everything — you will see a bright grey field and wonder why the specimen looks faint. Blacking the inside is the cheapest improvement in the whole build.

اس مرحلے کے لیے مواد:

گتے کی نلکیگتے کی نلکی2 ٹکڑے
سیاہ گتہسیاہ گتہ4 ٹکڑے

درکار اوزار:

پیمانہپیمانہ
نشترنشتر
4

Make a stage and a mirror

Fix a flat platform with a hole in it under the objective, and put a small mirror beneath the hole angled to throw light up through the specimen. The stage must be rigid and the focus adjustment must be smooth and fine — at 100× the depth of focus is a few micrometres, so a stage that flexes when you touch it is a microscope you cannot focus. A screw thread or a sliding tube with friction works; a hinge does not.

اس مرحلے کے لیے مواد:

ہموار آئینہہموار آئینہ1 ٹکڑا
گتاگتا6 ٹکڑے

درکار اوزار:

نشترنشتر
پیمانہپیمانہ
5

Look at something you already know

Start with a thin onion skin in a drop of water under a coverslip. It is one cell thick, almost transparent, and its brick-like cells are unmistakable. Beginning with a known specimen is how you tell an instrument fault from a specimen fault. If the onion cells are sharp, your build works and anything blurry afterwards is the preparation. If the onion is blurry, stop looking at pond water and fix the microscope — otherwise you will spend an evening blaming the wrong thing.

اس مرحلے کے لیے مواد:

پیازپیاز1 ٹکڑا
خوردبینی سلائیڈیں اور ڈھکنخوردبینی سلائیڈیں اور ڈھکن10 ٹکڑے

درکار اوزار:

استرے کا پھلاسترے کا پھل
درجہ دار پپیٹ (مور)درجہ دار پپیٹ (مور)
6

Measure the magnification you actually built

Put a millimetre ruler on the stage, look at it, and count how many screen or field widths one millimetre covers. Compare that with the magnification the focal lengths predict. They will disagree, often by 20 per cent or more, because the real tube length differs from the nominal one and the lenses are not exactly as specified. The measured number is the true one. Write it on the tube — every measurement you ever make with this instrument depends on it, and it is the whole subject of the micrometry rung at the end of this batch.

درکار اوزار:

پیمانہپیمانہ
7

Magnification, resolution and empty magnification

Jupyter نوٹ بک لوڈ ہو رہی ہے…

درکار اوزار:

پیمانہپیمانہ
8

Know what your build cannot do

A two-lens microscope made from simple lenses shows colour fringes at the edges and a field that goes soft away from the centre. Both are real and neither is your fault. The fringes are chromatic aberration, which is why the achromatic lens blueprint exists and why every serious objective is a cemented doublet or better. The soft edges are field curvature. Knowing which defects are inherent to the design stops you polishing a lens that was never the problem — and tells you exactly which upgrade is worth buying.

مواد

8

درکار اوزار

4

CC0 پبلک ڈومین

یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔

میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔

بحث

(0)

لاگ ان بحث میں شامل ہونے کے لیے

تبصرے لوڈ ہو رہے ہیں...