فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات

The Perforated-Character Ticket Punch: A Figure Pricked in Pins, So the Print Stays Readable
A conductor's punch cut out a whole figure from the ticket, and when he punched over a printed number, that number was lost, which caused confusion when the tickets were counted.
William J. Phelps of Springfield, Massachusetts, received US 79,498, dated 30 June 1868, for "such construction of the die and counter-die of a punch, whereby the printed or written matter upon a ticket or coupon will still remain plain and discernible, even after the said ticket or coupon has been cancelled or punched." The die's lower end is cut away to leave a group of projections forming the figure, a triangle in his drawing, and the counter-die has matching perforations; the projections may be made longer on one side "to give a shearing cut, or to enable some of the projections to partially make their cut before the others".
This rung compares the force for a pin group and a solid figure and the gain from staggering, then files a pin-group die and counter-die and punches over printed figures.
اعلیٰ
About 6 hours
ہدایات
1
1
Pins against a solid shape
Pins against a solid shape
Jupyter نوٹ بک لوڈ ہو رہی ہے…
2
2
A punch body before it
A punch body before it
The embedded blueprint is Hill's punch of the same date. Phelps keeps his own body and changes the die, so the character is pricked in holes instead of cut out.
3
3
Read US 79,498
Read US 79,498
"In most of the railroad-corporations, the conductors upon the different trains have different-shaped dies in their punches, each conductor's punch having a different-shaped die from any of the others, and many of these dies are of such form that when a conductor punches a ticket to cancel it, some important figure or character upon the coupon or ticket is often cut out and lost."
"It is obvious that the projections o o may be somewhat longer upon one side of the die, and decreasing in length towards the other side, in order to give a shearing cut, or to enable some of the projections o o to partially make their cut before the others, thus partially relieving the strain required to make the perforation of the whole series."
4
4
Make the pin die and punch over print
Make the pin die and punch over print
**Counter-die.** Mark a small triangle on a steel plate and drill six 1 mm holes along its outline, reaming them clean. Relieve the plate underneath so the chips fall through.
**Die.** File the end of a 6 mm steel rod down, leaving six 1 mm pins standing in the same pattern, located by clamping the drilled counter-die on the rod's end as a template. Leave the pins on one side 0.3 mm longer, as Phelps allowed.
**Fit.** Mount the die in a punch body, the free-spindle punch or the pivoted one, and the counter-die in the other lever. Harden and temper both.
**Test.** Print or write a row of figures on card and punch over them with the pin die and with a solid-shape die. Check which figures can still be read, and read the squeeze for each with the spring scale.
اس مرحلے کے لیے مواد:
نرم فولاد کی گول سلاخ0.1 میٹر
نرم فولاد کی پلیٹ1 ٹکڑا
گتا1 ٹکڑادرکار اوزار:
بے تار مشق
مشقوں کا سیٹ
باریک ریتیوں کا سیٹ
ریتیاں (ہاتھ کی ریتی)
میز کا شکنجہ
کلیمپ
پروپین مشعل
قوت پیما (کمانی ترازو)
ڈیجیٹل ورنیئر کیلیپر ۶ انچ
چمڑے کے کام کے دستانے
شفاف حفاظتی عینک5
5
A pin die that bends, misses or leaves burrs
A pin die that bends, misses or leaves burrs
Perforated-character ticket punch troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**William J. Phelps** of Springfield, Hampden County, Massachusetts, received US 79,498, dated 30 June 1868. The punch's body was the one of his 1867 patent; the spindle d was flat down to the shoulder s, the counter-die c sat in the lower jaw of the body C, the projections might be prismatic or cylindrical, and any letter, figure or character could be used. He noted the punch was as compact as any and could be made as cheaply as the ordinary punch. His claim is the die and counter-die of a group of projections and perforations formed into any letter, figure or character.
**Honest limits.** A hand-filed pin die stands in for his milled one. The notebook uses a simple shear formula and an ideal share between stages; its values are examples. Your readable figures are the result.
مواد
3- 0.1 میٹرپلیس ہولڈر
- 1 ٹکڑاپلیس ہولڈر
- 1 ٹکڑاپلیس ہولڈر
درکار اوزار
11- 1 vendor sell this, none ship to you yetپلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
متعلقہ بلیو پرنٹ
یہ بلیو پرنٹ علم بانٹتے ہیں — تکنیک، مواد یا اصول

The Free-Spindle Ticket Punch: A Loose Spindle Lifted by a Spring, Close to the Pivot
Emma کی طرف سے
دھات کاری کے اوزار
35
0
0
0
0
0

The Die-Spindle Ticket Punch: A Shaped Die on a Pivot, a Slot for the Ticket
Martin کی طرف سے
دھات کاری کے اوزار
33
0
0
0
0
0

The Coupon-Stringing Ticket Punch: Every Coupon Holed for the Counting Wire
Mark کی طرف سے
کاغذی دستکاری کے اوزار
25
0
0
0
0
0
CC0 پبلک ڈومین
یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔
میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔