فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات
The Tank-Headed Self-Feeding Brush: Soap in the Tank, a Plate to Meter It
Martin

تخلیق کار

Martin

6. اکتوبر 2026NO
36
0
0
0
0

The Tank-Headed Self-Feeding Brush: Soap in the Tank, a Plate to Meter It

Scrubbing a floor means going back to the bucket every few strokes. Ernest N. Broderick of Indianapolis received US 639,348, dated 19 December 1899, for a cleaning brush with a small tank on its perforated top, fed through a hollow handle from a hose; a perforated plate slid by a screw sets how far the holes open, and soap in the tank turns the water to suds — "a self-feeding brush." This rung works out how the sliding plate opens the holes, then builds the tank on a scrub brush and measures the flow at each plate setting.
درمیانہ
About 4 hours

ہدایات

1

Open area of the plate

Jupyter نوٹ بک لوڈ ہو رہی ہے…
2

A scrubbing brush before it

The embedded blueprint holds two brush heads on a sprung holder. Broderick puts a water tank on the head and feeds it through the handle.
3

Read US 639,348

"When used for scrubbing, the hose can be connected to a hydrant, and thus supply the desired amount of water to the brush, making it unnecessary to dip the brush into the bucket or tub of water. In other words, my device is a self-feeding brush. Should I desire to use soapy water, I can insert through the openings 10 particles of soap or soap powder. In this way I get soapsuds, which I use in scrubbing as it is needed, keeping the brush constantly supplied."
4

Perforate the brush back

Drill fourteen 4 mm holes through the scrub brush's back between the tufts, in two rows 30 mm apart.

اس مرحلے کے لیے مواد:

رگڑنے کا برشرگڑنے کا برش1 ٹکڑا

درکار اوزار:

میز کا شکنجہمیز کا شکنجہ
بے تار مشقبے تار مشق
مشقوں کا سیٹمشقوں کا سیٹ
پکی سیاہی کا مارکرپکی سیاہی کا مارکر
پیمانہپیمانہ
شفاف حفاظتی عینکشفاف حفاظتی عینک
5

Make the sliding plate

Cut an aluminium plate 10 mm shorter than the back. Drill it through the back's holes, then file its end square. Rivet two guide strips to the back's top so it slides lengthwise.

اس مرحلے کے لیے مواد:

ایلومینیم کی چادرایلومینیم کی چادر1 ٹکڑا
فولادی ریوٹفولادی ریوٹ1 ٹکڑا

درکار اوزار:

چادر کاٹنے کی قینچیچادر کاٹنے کی قینچی
بے تار مشقبے تار مشق
مشقوں کا سیٹمشقوں کا سیٹ
ریتیاں (ہاتھ کی ریتی)ریتیاں (ہاتھ کی ریتی)
ریوٹ سیٹریوٹ سیٹ
ریوٹ کا ہتھوڑاریوٹ کا ہتھوڑا
6

Build the tank

Fold an aluminium box 50 mm deep to the back's size with a lid. Drill the lid for a 25 mm filling hole and a handle socket. Seal it to the back with silicone and screws.

اس مرحلے کے لیے مواد:

ایلومینیم کی چادرایلومینیم کی چادر1 ٹکڑا
فولادی ریوٹفولادی ریوٹ1 ٹکڑا
سلیکون سیلنٹسلیکون سیلنٹ1 ٹکڑا
لکڑی کا پیچ #8 × ۱ انچلکڑی کا پیچ #8 × ۱ انچ1 ٹکڑا

درکار اوزار:

چادر کاٹنے کی قینچیچادر کاٹنے کی قینچی
میز کا شکنجہمیز کا شکنجہ
ریوٹ سیٹریوٹ سیٹ
بے تار مشقبے تار مشق
مشقوں کا سیٹمشقوں کا سیٹ
چمڑے کے کام کے دستانےچمڑے کے کام کے دستانے
7

Fit the adjusting screw

Run an M4 screw through a nut epoxied on the tank's end wall so its tip pushes the plate. Turn it to close or open the holes.

اس مرحلے کے لیے مواد:

مشینی پیچمشینی پیچ1 ٹکڑا
چھ گوشہ ڈھبریچھ گوشہ ڈھبری1 ٹکڑا
دو جزو والی ایپوکسیدو جزو والی ایپوکسی1 ٹکڑا

درکار اوزار:

بے تار مشقبے تار مشق
مشقوں کا سیٹمشقوں کا سیٹ
پیچ کس سیٹپیچ کس سیٹ
8

Fit the handle

Fix 1.2 m of 15 mm copper tube in the socket with brass fittings. Fit a ball valve and hose connector at its top.

اس مرحلے کے لیے مواد:

تانبے کی نلکیتانبے کی نلکی1 ٹکڑا
پیتل کے جوڑپیتل کے جوڑ1 ٹکڑا
گیند والا والوگیند والا والو1 ٹکڑا
PTFE چوڑی بند کرنے کا فیتہPTFE چوڑی بند کرنے کا فیتہ1 ٹکڑا

درکار اوزار:

نلی کاٹنے کا اوزارنلی کاٹنے کا اوزار
انگریزی پاناانگریزی پانا
9

The patent drawing

US 639,348 drawing sheet, public domain (expired patent).
قدم 9 - Image 1
10

Measure the flow at each setting

Connect the garden hose. Set the plate fully open, half and nearly shut, and catch the water for 30 s each in the jug. Then add a squirt of soap through the filling hole and scrub.
قدم 10 - Image 1

اس مرحلے کے لیے مواد:

پانیپانی1 ٹکڑا
کیسٹائل صابن (مائع)کیسٹائل صابن (مائع)1 ٹکڑا

درکار اوزار:

پیمائشی جگپیمائشی جگ
اسٹاپ واچاسٹاپ واچ
ڈیجیٹل ورنیئر کیلیپر ۶ انچڈیجیٹل ورنیئر کیلیپر ۶ انچ
باغ کا پائپباغ کا پائپ
11

A brush that floods, starves or leaks

Tank-headed self-feeding brush troubleshooting.

Flow

Loading...
12

History and honest limits

**Ernest N. Broderick** of Indianapolis filed US 639,348 on 6 February 1899; it is dated 19 December 1899. Rubber or leather strips seal the tank to the brush-top. Two hollow adjustable joints, ground to fit and clamped by a bolt, let the handle be set at any angle, for floors, walls, windows or dusting high furniture; with compressed air instead of water it blows dust away, and a mop or duster may replace the brush. **Honest limits.** Our handle is fixed; his joints are not built here. The notebook gives open area, not flow through a real hole. Your flows are the result.

مواد

14

درکار اوزار

18

CC0 پبلک ڈومین

یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔

میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔

بحث

(0)

لاگ ان بحث میں شامل ہونے کے لیے

تبصرے لوڈ ہو رہے ہیں...