فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات
Tuyere Iron: a Slotted Grate Cast in Grey Iron
Forge

تخلیق کار

Forge

18. اکتوبر 2026NO
12
0
0
0
0

Tuyere Iron: a Slotted Grate Cast in Grey Iron

The tuyere is the opening in the bottom of the forge fire through which the blast is blown. Bacon (1919): its openings must let the blast through easily while keeping cinders from dropping into the blast pipe, and there should be a way to open the pipe below and clear out the cinders that still get through. This one is a slotted grate over a socket for the blast pipe, cast in grey iron. The design and sizes are ours. The picture: our drawing.
اعلیٰ
2 days

ہدایات

1

Make the pattern

From pine, make a pattern of a square plate about 15 cm across and 2 cm thick with four or five narrow slots, and a short round socket under its centre to take the blast pipe. Taper every side slightly so it draws from the sand.

درکار اوزار:

چیڑ کا تختہچیڑ کا تختہ
گھما دار آریگھما دار آری
لکڑی کی رنداں کا سیٹلکڑی کی رنداں کا سیٹ
لکڑی کا گوندلکڑی کا گوند
ڈیجیٹل ورنیئر کیلیپر ۶ انچڈیجیٹل ورنیئر کیلیپر ۶ انچ
2

Ram the mould

Ram the pattern up in casting sand in the flask, draw it out, and cut a sprue and a runner to the cavity.

درکار اوزار:

ڈھلائی کی ریتڈھلائی کی ریت
ڈھلائی کا ڈبہڈھلائی کا ڈبہ
ہاتھ کی چھوٹی کھرپیہاتھ کی چھوٹی کھرپی
3

Melt the iron

Melting pig iron in the cupola and tapping it into the ladle.
4

Pour

Pour the molten grey iron from the ladle into the sprue in one steady stream until the mould is full; about 4 kg with the sprue (our estimate). Let it cool in the sand.

اس مرحلے کے لیے مواد:

کچے لوہے کی سلیںکچے لوہے کی سلیں4 کلوگرام

درکار اوزار:

ڈھلائی کا چمچہڈھلائی کا چمچہ
ڈھلائی کا ڈبہڈھلائی کا ڈبہ
ویلڈنگ کے دستانےویلڈنگ کے دستانے
چمڑے کا ایپرنچمڑے کا ایپرن
چہرے کی ڈھالچہرے کی ڈھال
5

Clean up

Shake out the casting, cut off the sprue, grind the fins and brush off the sand. Check that every slot is clear.

درکار اوزار:

اینگل گرائنڈراینگل گرائنڈر
تار برش کا سیٹتار برش کا سیٹ
ویلڈنگ کے دستانےویلڈنگ کے دستانے
چہرے کی ڈھالچہرے کی ڈھال
6

Set it in the forge

Set it in the hearth with the blast pipe in its socket and a way to open the pipe below for clearing cinders. Richardson's forge had its tuyere iron four inches below the hearth surface.

درکار اوزار:

ڈیجیٹل ورنیئر کیلیپر ۶ انچڈیجیٹل ورنیئر کیلیپر ۶ انچ

مواد

1

درکار اوزار

14

CC0 پبلک ڈومین

یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔

میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔

بحث

(0)

لاگ ان بحث میں شامل ہونے کے لیے

تبصرے لوڈ ہو رہے ہیں...