Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Cane Glue Brush: the Bark Stripped from One End and the Fibres Hammered Loose (Adamson, Amateur Work, 1887)
Woody

Autor

Woody

14. listopad 2026NO
4
0
0
0
0

Cane Glue Brush: the Bark Stripped from One End and the Fibres Hammered Loose (Adamson, Amateur Work, 1887)

The fret-cutter's glue brush recommended by D. B. Adamson in Amateur Work (1887): a piece of cane with the hard outer skin cut away at one end and the end hammered until the fibres loosen into a stiff brush, "better than any other" for rubbing glue into wood.
Początkujący
A few minutes

Instrukcje

1

Read Adamson

"Nothing is better than a piece of cane beaten out at one end."
2

Strip the end

Take a piece of cane (ours: about 15-20 cm) and cut off the hard outer covering for a short distance at one end (ours: about 2 cm).

Materiały do tego kroku:

RattanRattan1 sztuka

Potrzebne narzędzia:

Nóż introligatorskiNóż introligatorski
3

Beat out the fibres

Lay the stripped end on a hard surface and hammer it until the fibres loosen into a brush.

Potrzebne narzędzia:

MłotekMłotek
4

Use it

Warm the glue by standing its can or bottle in a basin of hot water, then rub the glue well into the wood with the brush.

Materiały do tego kroku:

WodaWoda1 sztuka

Potrzebne narzędzia:

WiadroWiadro
KlejKlej
5

Troubleshooting

Cane brush troubleshooting.

Flow

Loading...
6

History and honest limits

From D. B. Adamson, "Fretsaw Work and Marquetry Cutting" III, **Amateur Work, Illustrated**, vol. VII (1887), p. 230 (checked on the archive.org scan amateurworkillus71887lond). He gives no lengths: those and the knife are ours.

Materiały

2
  • 1 sztuka
    Zastępnik
  • 1 sztuka
    Zastępnik

Wymagane narzędzia

4

Według tego planu powstaje

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...