SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
ZIELONA PRZYSZŁOŚĆ
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Building a Charango — The Little High Lute of the Andes
Woody

Autor

Woody

3. lipiec 2026NO
0
0
0
0
0

Building a Charango — The Little High Lute of the Andes

Build a charango: a tiny, high-voiced Andean lute with ten strings in five doubled courses, once famously backed with an armadillo shell and now carved from wood. Build the deep little body, fit the fretted neck, tie the frets and string the five courses. A serious maker build in the fretted lute and why a small box sings high.
Średniozaawansowany
Several hours over several sessions

Instrukcje

1

A tiny lute that sings high

The charango is a small fretted lute with ten strings in five doubled courses. When the Spanish brought the lute-and-guitar family to the Andes, local makers shrank it and famously backed it with an armadillo shell — small body, short strings, a bright high voice.
2

Make the little body

Hollow or build a small, deep rounded soundbox — traditionally an armadillo shell, today carved from a block of wood. Keep it small: a little box is what gives the charango its bright, high sound.

Materiały do tego kroku:

Bloodwood BoardBloodwood Board1 sztuka
PVA Wood GluePVA Wood Glue1 sztuka

Tools needed:

Sloyd Carving KnifeSloyd Carving Knife
3

Fit the soundboard

Glue a thin flat softwood soundboard over the open face and cut a round soundhole in it. This top is the speaker that radiates the strings' vibration.

Materiały do tego kroku:

Dry Softwood BoardDry Softwood Board1 sztuka
4

Fit the fretted neck

Fix a straight neck to the body and lay in the frets — little ridges across the neck. Pressing a string against a fret shortens its speaking length and so raises its note; the fret positions are what set the scale.

Materiały do tego kroku:

Dowel RodDowel Rod1 sztuka
Nylon Fret LineNylon Fret Line1 sztuka
5

String the five courses

Run ten strings in FIVE doubled courses (two strings side by side per course) from a bridge on the soundboard up over the frets to ten tuning pegs. The doubled strings ring together for the charango's shimmering chorus.

Materiały do tego kroku:

Guitar String Set (Acoustic, Phosphor Bronze)Guitar String Set (Acoustic, Phosphor Bronze)1 sztuka
Tuning PegsTuning Pegs10 sztuk
6

Tune and strum

Tune the five courses (the classic charango tuning is re-entrant, so it is not simply low-to-high), then strum and pluck. Press behind a fret to change a note, and let the doubled strings shimmer.
7

Compendium — the fretted lute, small and high

The charango is a lute: strings stretched over a soundbox and along a fretted neck, plucked or strummed. Three ideas make it work. First, pitch: a string sounds higher when it is shorter, tighter or lighter, so the player raises a note by pressing the string down onto a FRET, which shortens the part that can vibrate — the same trick as the oud and the guitar, and the reason the frets are spaced the way they are. Second, doubled COURSES: the charango pairs its strings two-by-two, and because no two strings are ever perfectly identical they beat gently against each other, giving that rich shimmering chorus (the same reason a twelve-string guitar or a mandolin sounds so full). Third, and most charango of all, SIZE: the soundbox and the strings are tiny, and small light strings on a short scale vibrate fast, so the whole instrument sits an octave or so above a guitar — bright, chirping, cutting through the thin high-altitude air of the Andes. It descends from the Spanish vihuela and baroque guitar carried across the Atlantic, themselves descendants of the Arabic oud, and it belongs with every soundbox-and-strings instrument from the lyre of Ur onward — the charango is simply that ancient idea shrunk to fit a poncho pocket.

Materiały

7

Wymagane narzędzia

1

You can swap these in

Can't get one of the materials? Swap it for an equivalent — these work just as well.

Powiązane blueprinty

Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...