Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Bimetallic Strip: Ure's Thermostatic Bar of Steel and Brass (1839)
Forge

Autor

Forge

4. listopad 2026NO
8
0
0
0
0

Bimetallic Strip: Ure's Thermostatic Bar of Steel and Brass (1839)

The compound bar of Andrew Ure's 1831 thermostat: a thin steel ruler and a ruler of hard-hammered brass riveted face to face. Brass expands more than steel, so when the bar warms it bends, and the free end can work a valve, damper or cock. Bolt one end fast and leave the other free to move. Source: A. Ure, Dictionary of Arts, Manufactures and Mines (1839), 'Thermostat'. Picture: the book's Fig. 1130.
Początkujący
Unknown

Instrukcje

1

Prepare the two rulers

Take two long thin rulers, one of steel and one of brass. Hammer the brass hard.

Materiały do tego kroku:

Taśma ze stali węglowejTaśma ze stali węglowej1 thin ruler
Taśma mosiężnaTaśma mosiężna1 thin ruler

Potrzebne narzędzia:

MłotekMłotek
KowadłoKowadło
2

Rivet them face to face

Lay the rulers face to face and rivet them firmly together along their length.

Materiały do tego kroku:

Nity miedzianeNity miedziane1 sztuka

Potrzebne narzędzia:

Wiertarka ręcznaWiertarka ręczna
Zestaw nitowniczyZestaw nitowniczy
MłotekMłotek
3

Mount and use

Fix one end of the compound bar by bolts and leave the other free: when heated the free end moves by flexure, and through links and levers it can open or close a valve, cock, register or ventilator. In the still's heat-governor two such bars stand with their edges up and down.

Potrzebne narzędzia:

MłotekMłotek

Materiały

3

Wymagane narzędzia

4

Według tego planu powstaje

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...