Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
The Centre-Fire Cartridge With an Anvil (Boxer, 1866-1869) - History and How It Works
Charlie

Autor

Charlie

13. listopad 2026DE
3
0
0
0
0

The Centre-Fire Cartridge With an Anvil (Boxer, 1866-1869) - History and How It Works

Początkujący
About 15 minutes

Instrukcje

1

Read Boxer's patent

His first claim is for "constructing the anvil to cartridges for breech loading fire-arms with shoulders or projections, so formed as to abut against the edge of the percussion cap, and thus to prevent its entering the cap to such an extent as to cause the ignition ... except when the cap is acted upon by the striker of the gun" (US 91,818, dated 29 June 1869; patented in England 13 October 1866).
2

How it works, in principle

In a centre-fire cartridge the cap is in the middle of the base. When the gun's striker dents the cap, it is crushed against the anvil and fires, and the flame passes into the case. Boxer shaped the anvil so that, until the striker hits, it cannot be pushed far enough into the cap to fire it.
3

Why it mattered

A cartridge that only fires when struck by the gun is safer to carry, ship and handle. Centre-fire cartridges with the cap in the middle of the base became the usual design for rifles and pistols.
4

Honest limits

From the text of US 91,818 (1869). Boxer's patent also describes the construction of the case; that is not covered here. This page gives no dimensions, compositions, charges or making steps, by design.

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...