Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Camp Table Box: Packing Box Sawn in Two, With Leg Sockets for Travel and Table Use (Boy Mechanic, 1919)
Woody

Autor

Woody

13. listopad 2026NO
8
0
0
0
0

Camp Table Box: Packing Box Sawn in Two, With Leg Sockets for Travel and Table Use (Boy Mechanic, 1919)

Geo. J. Easter's camp outfit box from The Boy Mechanic, Book 3 (1919): a 14 by 20 by 29 in box sawn in two, with corner sockets inside. On short legs the halves lock together as one packing box; on 30 in legs each half turns over to make a table top, covered with the oilcloth that wrapped the legs.
Początkujący
About 3 hours

Instrukcje

1

His sizes in centimetres

Wczytywanie notatnika Jupyter…
2

Read The Boy Mechanic, Book 3

"A very useful combination packing box and camp table may be made from a coffee or other large box." A box 14 in deep, 20 in wide and 29 in long outside slips under a spring-wagon seat and lets a person's knees go under it as a table.
3

Saw and brace the box

Saw the box in two on the centre line of the narrow way, making two open boxes of the same size and depth. Brace the corners of each well on the outside (A, Fig. 1).

Materiały do tego kroku:

Skrzynka drewnianaSkrzynka drewniana1 sztuka
Deska sosnowaDeska sosnowa1 sztuka
GwoździeGwoździe1 sztuka

Potrzebne narzędzia:

Piła ręcznaPiła ręczna
MłotekMłotek
OłówekOłówek
Miara zwijanaMiara zwijana
4

Fit the leg sockets and fastenings

Fasten strips 1/2 in thick, 1-1/4 in wide and as long as the box is deep inside each corner to form sockets for the legs. Put rope handles in the ends of each box, and a hook and eye to lock the halves together.

Materiały do tego kroku:

Deska sosnowaDeska sosnowa1 sztuka
GwoździeGwoździe1 sztuka
Lina bawełnianaLina bawełniana1 sztuka
HaftkaHaftka2 sztuk

Potrzebne narzędzia:

Piła ręcznaPiła ręczna
MłotekMłotek
Wiertarka ręcznaWiertarka ręczna
5

Make the legs

Make four packing legs about 12 in long to fit the sockets, and eight table legs 30 in long. Fit them loosely, as they swell in damp weather; wedge them to make them rigid.

Materiały do tego kroku:

Deska sosnowaDeska sosnowa2 sztuk

Potrzebne narzędzia:

Piła ręcznaPiła ręczna
Strug ręcznyStrug ręczny
6

Pack and set up

To pack, set one half open side up, put in the four short legs, fill it to the level of the leg ends, slip the other half on the legs and hook the two together; properly roped it goes as baggage. Pack the canvas and things needed first on arrival. Carry the long legs diagonally in the bottom, wrapped in a piece of oilcloth that later covers the table. To make one table, or two, take out the packing legs, put the long legs in the sockets and turn each half over as a table top.

Materiały do tego kroku:

CerataCerata1 sztuka

Potrzebne narzędzia:

NożyczkiNożyczki
7

Troubleshooting

Camp table troubleshooting.

Flow

Loading...
8

History and honest limits

From "A Table Box for Campers" by Geo. J. Easter, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, p. 124). He gives no leg section; the legs are sized to fit the sockets. The tools and metric figures are ours.

Materiały

6

Wymagane narzędzia

7

Według tego planu powstaje

Powiązane blueprinty

Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...