Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Cartridge Belt: Wide Leather Belt With a Woven Strip Forming the Loops (Boy Mechanic, 1915)
Tex

Autor

Tex

13. listopad 2026FO
5
0
0
0
0

Cartridge Belt: Wide Leather Belt With a Woven Strip Forming the Loops (Boy Mechanic, 1915)

Robert Pound of Lavina, Montana, sent this cartridge belt to The Boy Mechanic, Book 2 (1915): a leather belt about 2-1/2 in wide with a 1 in strip woven through pairs of slits to form a row of loops. Using the strip's free end in the buckle lets the loops be tightened for different sizes.
Początkujący
About 2 hours

Instrukcje

1

His sizes, and how many loops

Wczytywanie notatnika Jupyter…
2

Read The Boy Mechanic, Book 2

"Procure a leather belt, about 2-1/2 in. wide and long enough to reach about the waist, also a piece of leather, 1 in. wide and twice as long as the belt."
3

Cut the belt and strip

Cut a leather belt about 2-1/2 in wide and long enough to go round the waist, and a strip 1 in wide and twice as long as the belt. Fix a buckle to one end of the belt and rivet one end of the strip to the belt near the buckle.

Materiały do tego kroku:

Skóra uprzężowaSkóra uprzężowa2 sztuk
Żelazna klamra z kolcemŻelazna klamra z kolcem1 sztuka
Nity miedzianeNity miedziane1 sztuka

Potrzebne narzędzia:

Nóż do skóryNóż do skóry
Dziurkacz do skóryDziurkacz do skóry
MłotekMłotek
Miara zwijanaMiara zwijana
4

Weave the loops

Cut two slits in the belt, a cartridge's diameter apart. Pass the strip through one slit and back through the other to make a loop. About 1/4 in further on, cut two more slits and form the next loop the same way, and so on along the whole belt.

Potrzebne narzędzia:

Nóż do skóryNóż do skóry
Miara zwijanaMiara zwijana
OłówekOłówek
5

Finish the end

Rivet the end of the strip to the belt, or take it into the buckle: then the strip can be drawn up to fit cartridges of different sizes. Punch the holes for the buckle tongue.

Materiały do tego kroku:

Nity miedzianeNity miedziane1 sztuka

Potrzebne narzędzia:

Dziurkacz do skóryDziurkacz do skóry
MłotekMłotek
6

Troubleshooting

Cartridge belt troubleshooting.

Flow

Loading...
7

History and honest limits

From "How to Make a Cartridge Belt" by Robert Pound, Lavina, Mont., in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 55). He gives no slit length and no cartridge size; the slit spacing follows whatever cartridge the belt is for. The tools and metric figures are ours.

Materiały

3

Wymagane narzędzia

5

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...