Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Carbon Electrode: Oil-Coke Pressed with Tar and Baked at 1200° (Thorpe, 1912)
Charlie

Autor

Charlie

4. listopad 2026DE
10
0
0
0
0

Carbon Electrode: Oil-Coke Pressed with Tar and Baked at 1200° (Thorpe, 1912)

Amorphous carbon electrodes as made for aluminium reduction: oil-coke is selected, ground and calcined, pressed hard with tar as a binder, and baked at about 1200° in a kiln like a pottery kiln, packed in carbon so the surface does not burn. A good electrode conducts electricity well but heat poorly, is hard, resists surface oxidation, has low porosity and is even throughout. Thorpe gives 25 to 60 amperes per square inch as the permissible current density, though much less is used in practice. Not given: the tar proportion, the pressure and the sizes. Source: T. E. Thorpe, Dictionary of Applied Chemistry vol. I (1912), p. 107. Picture: the book's text.
Zaawansowany
Unknown

Instrukcje

1

Grind and calcine the coke

Select the oil-coke carefully for low ash, volatile matter and sulphur. Grind it and calcine it. Ours: the ball mill and the kiln for calcining.

Materiały do tego kroku:

Koks naftowyKoks naftowy1 carefully selected

Potrzebne narzędzia:

Żelazny młyn kulowyŻelazny młyn kulowy
Piec wysokotemperaturowyPiec wysokotemperaturowy
2

Press with tar

Mix the ground coke with tar as a binder and press it into blocks under high pressure. Ours: a hydraulic press.

Materiały do tego kroku:

Smoła węglowaSmoła węglowa1 binder
Nieznane wymiaryNieznane wymiary1 sztuka

Potrzebne narzędzia:

Prasa hydraulicznaPrasa hydrauliczna
3

Bake in carbon

Embed the blocks in carbon, which protects their surface from oxidation, and bake them at about 1200° in a kiln built on the lines of a pottery kiln. Ours: petroleum coke as the packing.

Potrzebne narzędzia:

Piec wysokotemperaturowyPiec wysokotemperaturowy
Koks naftowyKoks naftowy

Materiały

3

Wymagane narzędzia

4

Według tego planu powstaje

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...