Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Cold Trap: Liquid-Air Well round the Line, in an Evacuated Jacket (Smith, US 2,513,114)
Charlie

Autor

Charlie

9. listopad 2026DE
4
0
0
0
0

Cold Trap: Liquid-Air Well round the Line, in an Evacuated Jacket (Smith, US 2,513,114)

A cold trap freezes water and other vapours out of a vacuum line before they reach a gauge or a pump. D. W. Smith (US 2,513,114, filed 1944) blows it as one glass piece: the inlet tube runs down through an annular well of liquid air, and an outer jacket round the well opens into the outlet tube, so the pump keeps the jacket evacuated and it insulates the liquid air. Only a small ring of liquid air is open to the room, so little boils away and the trap stays cold for long periods. Source: D. W. Smith, "Liquid Air Trap", US Patent 2,513,114 (1950). Picture: its Figs. 1-2.
Zaawansowany
Unknown

Instrukcje

1

Read Smith

"My invention consists in providing a cold trap integral with a tubular conduit and designed to surround the conduit with a cylindrical pool of liquid air; a double-walled, evacuated chamber being provided to insulate the liquid air from the atmosphere."
2

Blow the trap

Make one glass piece (Fig. 1): an inlet tube running down through the middle; round it an annular well, open at the top, whose inner side is the inlet tube and outer side an inner wall; round the well a closed outer jacket coaxial with it, joined to the well at the top. Below, the inlet tube ends open inside the jacket, and the jacket narrows into the outlet tube (the jacket and the line share one vacuum). Smith says glass may be used and the material is not critical; no sizes, glass or blowing method are given (ours: a glassblowing torch and an annealing oven).

Materiały do tego kroku:

Rurka szklanaRurka szklana1 kind not given
Nieznane szkłoNieznane szkło1 sztuka

Potrzebne narzędzia:

Palnik stołowy do dmuchania szkłaPalnik stołowy do dmuchania szkła
Piec do wyżarzaniaPiec do wyżarzania
Nieznana metoda kształtowaniaNieznana metoda kształtowania
Nieznane wymiaryNieznane wymiary
3

Put it in the line

Join the inlet tube to the side to be protected (Smith: the ion gauge) and the outlet tube to the vacuum pump. Pumping the line also evacuates the jacket, which then insulates the well.

Potrzebne narzędzia:

Pompa próżniowaPompa próżniowa
4

Fill and use

Fill the well with liquid air. Water, mercury and other vapours freeze onto the walls of the inlet tube inside the well and stay there. Only the small ring at the top of the well is open to the room, so the liquid air lasts a long time without topping up.

Potrzebne narzędzia:

Ciekłe powietrzeCiekłe powietrze

Materiały

2

Wymagane narzędzia

6

Według tego planu powstaje

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...