Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Two-Part Soap Dish: a Studded, Drained Tray on a Scallop-Edged Base That Lets Air Under the Soap (Conkling, 1901)
Clay

Autor

Clay

13. listopad 2026DK
4
0
0
0
0

Two-Part Soap Dish: a Studded, Drained Tray on a Scallop-Edged Base That Lets Air Under the Soap (Conkling, 1901)

Allen Conkling of Chicago received US 679,110, dated 23 July 1901, for a soap dish in two parts that keeps soap dry. The upper tray holds the soap on little rounded studs above drain holes; it sits on a lower dish whose edge is scalloped, so air flows in underneath, up through the holes and round the soap. The lower part lifts off to be cleaned. We make it from stoneware clay. All sizes are ours.
Początkujący
About 3 hours plus drying and firing

Instrukcje

1

Shrinkage

Wczytywanie notatnika Jupyter…
2

Read US 679,110

"A circulation of air is thus established through the spaces at the edges of the lower part, thence through the drain-openings in the outer or upper part to and around the soap, which soon dries the same after use."
3

Make the upper tray

Roll a slab of stoneware clay about 6 mm thick (ours). Cut the tray's bottom and a strip for its retaining wall, score and slip the joins and join them. Roll small balls, flatten them slightly and join them to the bottom inside as his rounded studs A2. Pierce drain holes A3 between the studs with a tool.

Materiały do tego kroku:

Glina kamionkowaGlina kamionkowa1 sztuka

Potrzebne narzędzia:

Wałek do ciastaWałek do ciasta
Zestaw narzędzi garncarskichZestaw narzędzi garncarskich
Narzędzie do nacinania glinyNarzędzie do nacinania gliny
4

Add the flange

Join a narrow strip round the underside of the tray, a little in from its edge, so it hangs down as his flange A4 and will sit over the lower part's rim.

Materiały do tego kroku:

Glina kamionkowaGlina kamionkowa1 sztuka

Potrzebne narzędzia:

Zestaw narzędzi garncarskichZestaw narzędzi garncarskich
Narzędzie do nacinania glinyNarzędzie do nacinania gliny
5

Make the lower part

Make a shallow dish of the same outline, sized so its rim fits inside the tray's flange. Cut scallops into the top of its rim, his B', so there are gaps for air when the tray sits on it.

Materiały do tego kroku:

Glina kamionkowaGlina kamionkowa1 sztuka

Potrzebne narzędzia:

Wałek do ciastaWałek do ciasta
Zestaw narzędzi garncarskichZestaw narzędzi garncarskich
Narzędzie do nacinania glinyNarzędzie do nacinania gliny
6

Dry, glaze and fire

Let both parts dry slowly under loose cover, fire them to bisque, dip them in glaze with tongs (wipe the glaze off the rim and flange where they touch the kiln shelf), and glaze-fire them, both as the clay and glaze makers specify.

Materiały do tego kroku:

Szkliwo przezroczysteSzkliwo przezroczyste1 sztuka

Potrzebne narzędzia:

Piec ceramicznyPiec ceramiczny
Zestaw wyposażenia piecaZestaw wyposażenia pieca
Szczypce do zanurzaniaSzczypce do zanurzania
7

Use it

Set the tray on the lower part with the flange over the rim. Water from the soap drains through the holes into the lower part; lift the tray off to empty and clean it.
8

Troubleshooting

Soap dish troubleshooting.

Flow

Loading...
9

History and honest limits

**Allen Conkling** of Chicago, US 679,110, dated 23 July 1901, filed 7 March 1901. He claimed "a soap-dish formed of two parts, the upper part forming a supporting-tray having a retaining-wall, perforated bottom and studs above the same, and a retaining-flange extending downward from the bottom of said upper part to fit the upper edge of the lower part, and a lower part having an upper edge scalloped". He made the parts to be molded and names no material; the stoneware, slab-building, glaze, firing and all sizes are ours.

Materiały

2

Wymagane narzędzia

6

Według tego planu powstaje

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...