SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Continuous Glass Fibre Strand Drawn from a Platinum Bushing
Charlie

Autor

Charlie

19. październik 2026DE
9
0
0
0
0

Continuous Glass Fibre Strand Drawn from a Platinum Bushing

Glass fibre for cloth is not spun like wool: hundreds of fine filaments are pulled at once from small nozzles in a hot platinum box and wound up as one strand. This is the method of Slayter and Thomas's Owens-Corning patent (US 2,234,986, 1941): an electrically heated platinum-rhodium thimble melts glass cullet, a blower freezes each filament just below its nozzle, a size is put on, and a drum pulls and winds the strand. The faster the drum, the finer the fibre. The picture: a glass fibre roving (NoiseD, Wikimedia Commons, CC BY-SA 3.0).
Zaawansowany
1 day

Instrukcje

1

Charge the bushing with cullet

Fill the platinum-rhodium thimble (90 % platinum, 10 % rhodium) with broken soda-lime glass. Its floor has rows of staggered nipples .02–.08 in (0.5–2 mm) wide; .04 in (1 mm) is best.

Materiały do tego kroku:

Stłuczka szkła sodowo-wapniowegoStłuczka szkła sodowo-wapniowego1 as required

Potrzebne narzędzia:

Płyta dyszowa platynowo-rodowaPłyta dyszowa platynowo-rodowa
Rękawice żaroodporneRękawice żaroodporne
Okulary ochronneOkulary ochronne
2

Melt it with an electric current

Pass an adjustable current through the thimble to melt the glass. Ordinary lime glass is pulled from about 2,100–2,500 °F (about 1,150–1,370 °C).

Potrzebne narzędzia:

Płyta dyszowa platynowo-rodowaPłyta dyszowa platynowo-rodowa
Transformator obniżający napięcieTransformator obniżający napięcie
PirometrPirometr
Rękawice żaroodporneRękawice żaroodporne
3

Start the cooling blower

Blow cool air across the nipple tips from a blower a short distance below them. Each filament sets within a small fraction of an inch of its nipple.

Potrzebne narzędzia:

DmuchawaDmuchawa
4

Gather the filaments through a sized guide

Draw all the filaments together through one guide eye kept wet with size. Here the size is wax, kept molten with a burner; the patent also names oil, starch, gum and resin. An air jet dries off the excess size.

Materiały do tego kroku:

ParafinaParafina1 as required

Potrzebne narzędzia:

Palnik BunsenaPalnik Bunsena
DmuchawaDmuchawa
5

Pull and wind on a drum

Wind the strand on a fast drum that moves back and forth so it lays evenly. Draw at a few hundred to a few thousand feet per minute: the faster you draw, the finer the fibre.

Potrzebne narzędzia:

Bęben odbierającyBęben odbierający

Materiały

2

Wymagane narzędzia

8

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...