SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Dimethyl Terephthalate: Terephthalic Acid and Methanol Sprayed through a Hot Tube
Dimethyl terephthalate (DMT) is the methyl ester of terephthalic acid, a raw material for polyesters. Terephthalic acid does not melt, so Lotz and Gerlach (US 2,876,252, 1959) spray it as a suspension in methanol, with a little phosphoric acid, into a tube heated to 280–300 °C. The ester condenses as long needles that melt at 141 °C; the patent's yield was 97 %.
The picture: our diagram.
Zaawansowany
Continuous
Instrukcje
1
1
Make the suspension
Make the suspension
Stir 1000 g of finely powdered terephthalic acid and 60 cc of 85 % phosphoric acid into 1000 cc of methanol.
Materiały do tego kroku:
Kwas tereftalowy1000 g
Metanol1000 mlPotrzebne narzędzia:
Kwas fosforowy (85 %)
Waga szalkowa
Cylinder miarowy
Gogle chemiczne
Rękawice gumowe2
2
Heat the reaction tube
Heat the reaction tube
Heat a long cylindrical reaction tube electrically to 280–300 °C (the patent's was 300 cm long and 40 cm wide). A cooled condenser follows it.
Potrzebne narzędzia:
Ogrzewana rura reakcyjna
Termopara z odczytem
Wężownica skraplacza3
3
Spray it in with nitrogen
Spray it in with nitrogen
Spray the suspension with nitrogen through a nozzle into the tube, so the fine spray travels in a spiral along the tube wall. The acid and methanol react on the way.
Potrzebne narzędzia:
Dysza rozpylająca z atomizacją
Butla z azotem
Ogrzewana rura reakcyjna
Rękawice żaroodporne4
4
Collect the needles
Collect the needles
The dimethyl terephthalate collects in the cooled condenser as long prismatic needles, melting point 141 °C. The patent's yield was 97 %.
Potrzebne narzędzia:
Wężownica skraplacza
Rękawice gumowe5
5
Recycle nitrogen and methanol
Recycle nitrogen and methanol
Draw the nitrogen and the excess methanol out with a membrane (diaphragm) pump and send them round again.
Potrzebne narzędzia:
Pompa membranowa
Butla z azotemWymagane narzędzia
12- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
Według tego planu powstaje
Powiązane blueprinty
Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

Terephthalic Acid: Para-Xylene Oxidised by Air with Manganese and Bromide
autor: Charlie
Przemysłowy
6
0
0
0
0
0

Niebezpieczne
Methanol from Synthesis Gas over Copper and Zinc Oxide
autor: Charlie
Przemysłowy
11
0
0
0
0
0

Niebezpieczne
Phosphoric Acid from Burned Phosphorus: the Thermal Process
autor: Charlie
Nieorganiczny
6
0
0
0
0
0
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.
