Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Dust Mask: Rigid Perforated Guard with a Replaceable Cloth Filter (Swindell, US 2,681,060, 1954)
Emma

Autor

Emma

3. listopad 2026SE
13
0
0
0
0

Dust Mask: Rigid Perforated Guard with a Replaceable Cloth Filter (Swindell, US 2,681,060, 1954)

A simple dust mask for workshops and plants. A rigid cup with air holes covers the nose and mouth. A cloth filter lines the inside and folds over the cup's rim, held by wire clips: the air passes through the cloth, and the cloth also pads the rim against the face. Change the cloth and the same mask can pass from worker to worker. Result: a nose-and-mouth dust mask with a filter you can replace. Source: M. E. Swindell, US 2,681,060 (1954). Unknown: sizes, how the cup is formed, the cloth. Picture: the patent drawing.
Początkujący
Unknown

Instrukcje

1

Make the guard

Make a rigid cup to cover the nose and mouth, of composition rubber, plastic, metal or another suitable material. Give it a narrow upright bulge at the front for the nose. Shape its edge to the face so it fits close at the bridge of the nose and the chin, and turn the whole edge outward as a curved lip. Make air holes in both the nose bulge and the mouth part. Not given: sizes, the number of holes, how it is formed.

Materiały do tego kroku:

Nieznany materiałNieznany materiał1 guard

Potrzebne narzędzia:

Wiertarka ręcznaWiertarka ręczna
Nieznane wymiaryNieznane wymiary
2

Fit the filter clips

Bend several clips of springy wire and rivet them to the guard near its edge, so each can press down on the back of the lip. Ours: spring steel wire. Not given: how many clips.

Materiały do tego kroku:

Drut sprężynowyDrut sprężynowy1 clips
Nieznany metalNieznany metal1 rivets

Potrzebne narzędzia:

Szczypce okrągłeSzczypce okrągłe
Zestaw nitowniczyZestaw nitowniczy
3

Make the head strap

Cut an elastic strap to go round the head and fit a hook at each end. The hooks catch in a pair of the guard's air holes. Not given: the length, the hook metal.

Materiały do tego kroku:

Sznurek elastycznySznurek elastyczny1 strap
Nieznany metalNieznany metal1 two hooks

Potrzebne narzędzia:

NożyczkiNożyczki
Szczypce okrągłeSzczypce okrągłe
4

Fit the filter and wear it

Lay a cup-shaped cloth filter in the hollow of the guard. Fold its edges over the lip and clamp them to the back of the lip with the clips. The cloth leaves an air space in front of the face and one between itself and the guard, and it pads the lip where it touches the face. Hook the strap into the holes and put the mask over the nose and mouth. Replace the cloth when it is used, or before the mask passes to another wearer. Not given: the cloth.

Materiały do tego kroku:

Nieznana tkaninaNieznana tkanina1 filter

Potrzebne narzędzia:

NożyczkiNożyczki

Materiały

5

Wymagane narzędzia

5

Według tego planu powstaje

Powiązane blueprinty

Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...