Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Enamelled Copper Magnet Wire
Emma

Autor

Emma

11. październik 2026SE
26
0
0
3
0

Enamelled Copper Magnet Wire

Magnet wire, the wire wound into motors, transformers, coils and loudspeakers, is copper wire with a very thin layer of insulation. Despite the name, the "enamel" is not glass but a polymer film. The usual process runs in one continuous line: the wire is annealed to make it soft and flexible, passes through a bath of enamel, a polymer such as polyurethane, polyester, polyamide or polyimide dissolved in solvent, then through a die that leaves only a thin even layer, and up through a vertical oven that first drives off the solvent and then cures the film. One coat is too thin, so the wire goes round many times, building the insulation up layer by layer.
Zaawansowany
Continuous (industrial)

Instrukcje

1

Anneal

Copper wire of the final diameter runs through an annealing oven to make it soft and flexible.

Materiały do tego kroku:

Drut miedzianyDrut miedziany100 kg

Potrzebne narzędzia:

Piec do wyżarzaniaPiec do wyżarzania
2

Coat

The wire passes through a bath of enamel, a polymer dissolved in solvent.

Materiały do tego kroku:

Emalia do drutu (roztwór polimeru)Emalia do drutu (roztwór polimeru)5 litrów

Potrzebne narzędzia:

Linia do emaliowania drutuLinia do emaliowania drutu
3

Size the coat

A die lets through only the wire and a thin layer of enamel; the rest is wiped back.

Potrzebne narzędzia:

Linia do emaliowania drutuLinia do emaliowania drutu
4

Dry and cure

The wire rises through a vertical oven: cooler at the bottom to drive off the solvent, hotter at the top to cure the film.

Potrzebne narzędzia:

Linia do emaliowania drutuLinia do emaliowania drutu
5

Repeat and check

The wire makes several passes until the insulation is thick enough, then the overall diameter is measured and it is spooled.

Potrzebne narzędzia:

Linia do emaliowania drutuLinia do emaliowania drutu
MikrometrMikrometr

Materiały

2

Wymagane narzędzia

3

Powiązane blueprinty

Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...