Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Folding Leather Coin Purse With a Tray Leaf and a Pocket Leaf (Eninger, 1909)
Tex

Autor

Tex

13. listopad 2026FO
5
0
0
0
0

Folding Leather Coin Purse With a Tray Leaf and a Pocket Leaf (Eninger, 1909)

Charles Eninger of New York received US 912,451, dated 16 February 1909, for a coin purse made of two oval pieces of leather sewn together, turned and folded in half. Between the two walls of one half is a closed pocket for the coins; the inner wall of the other half has an opening, so that half is a tray the coins slide onto when it is opened. The piece cut out for the opening is sewn on the pocket half and fills the opening when it is folded. A snap fastener holds it shut, and "there is practically no waste of material". All sizes are ours.
Początkujący
About 2 hours

Instrukcje

1

Pattern sizes

Wczytywanie notatnika Jupyter…
2

Read US 912,451

"The leaf 9 constitutes a pocket or receptacle for the coins, while the leaf 8 is in effect a tray on to which the coins from the pocket will slide when the purse is opened."
3

Cut the two walls

Draw an ellipse 150 x 90 mm (ours) on paper, cut it out and mark round it twice on thin leather: the outer wall and the inner wall, each in one piece.

Materiały do tego kroku:

Skóra cielęcaSkóra cielęca1 sztuka
Kwadratowy arkusz papieruKwadratowy arkusz papieru1 sztuka

Potrzebne narzędzia:

OłówekOłówek
Nóż do skóryNóż do skóry
4

Cut the opening

Mark the transverse centre line (the fold). In one half of the inner wall (the tray half) cut an oval opening that stops short of the outer edge and short of the fold, leaving a margin all round: his retaining flange 11. Keep the piece you cut out: it becomes the third wall 12.

Potrzebne narzędzia:

Nóż do skóryNóż do skóry
5

Sew the walls and turn them

Lay the two walls face to face and sew them together all round the edge (his line 6). Turn the purse inside out (through the opening, ours) so the seam is hidden, and rub the edge flat.

Materiały do tego kroku:

Nici do szyciaNici do szycia1 sztuka

Potrzebne narzędzia:

SzydłoSzydło
Igły do szycia ręcznegoIgły do szycia ręcznego
Kostka introligatorskaKostka introligatorska
6

Sew on the third wall

Fold the purse along the centre line. On the other leaf (the pocket half), where the opening lands, sew the cut-out piece to the inner wall (his stitching 13), so that when the purse is folded it fits into the opening and lets the leaves lie flat.

Materiały do tego kroku:

Nici do szyciaNici do szycia1 sztuka

Potrzebne narzędzia:

SzydłoSzydło
Igły do szycia ręcznegoIgły do szycia ręcznego
7

Fit the snap

Fix the stud on the inner side of the pocket leaf, on the third wall's side, and the socket on the outer wall of the other leaf in line with the opening, so the stud passes into the opening and snaps into the socket when closed, as he describes.

Materiały do tego kroku:

ZatrzaskZatrzask1 sztuka

Potrzebne narzędzia:

Dziurkacz do skóryDziurkacz do skóry
Młotek ciesielskiMłotek ciesielski
8

Use it

Coins go into the space between the walls through the opening. Opened flat, they slide from the pocket onto the tray leaf, where they can be seen and picked out through the opening; the flange stops them falling unless the purse is held upside down. Folded, the third wall closes the opening.
9

Troubleshooting

Coin purse troubleshooting.

Flow

Loading...
10

History and honest limits

**Charles Eninger** of New York, assignor to H. B. Hardenburg & Co., US 912,451, dated 16 February 1909, filed 7 December 1907. He claimed "a purse comprising an outer flexible wall of one piece, and an inner flexible wall of one piece and of equal extent with the outer wall, said walls being secured together at their edges". He says leather is the material preferably employed but gives no sizes; the sizes, calf and thread are ours.

Materiały

4

Wymagane narzędzia

7

Według tego planu powstaje

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...