Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Refractory Cement: Clay, Iron Filings and Manganese, Fired Hard (Spon's Workshop Receipts)
A fireproof and waterproof cement from Spon's Workshop Receipts: dried clay, clean iron filings, peroxide of manganese, sea salt and borax, ground fine, wetted to a thick paste, applied at once and then heated slowly almost to white heat.
Fired, it is very hard and stands both red heat and boiling water.
Source: Spon, Workshop Receipts, first series, p. 24. Picture: the recipe.
Początkujący
Unknown
Instrukcje
1
1
Dry and powder the clay
Dry and powder the clay
Dry 4 or 5 parts of clay thoroughly and pulverize it.
Materiały do tego kroku:
Glina surowa ze złoża1 4 or 5 partsPotrzebne narzędzia:
Moździerz z tłuczkiem2
2
Mix the powders
Mix the powders
Add 2 parts of fine iron filings free from oxide, 1 part of peroxide of manganese, 1/2 part of sea salt and 1/2 part of borax. Mingle them thoroughly and make the mixture as fine as possible.
Materiały do tego kroku:
Opiłki żelaza1 2 parts, fine, free from oxide
Ditlenek manganu (piroluzyt)1 1 part
Sól morska gruboziarnista1 1/2 part
Boraks w proszku1 1/2 partPotrzebne narzędzia:
Moździerz z tłuczkiem3
3
Make the paste, apply and fire
Make the paste, apply and fire
Work the powder into a thick paste with as much water as it needs, mixing thoroughly. Use it at once. After applying it, heat it gradually, almost to a white heat.
Materiały do tego kroku:
Woda1 sztukaPotrzebne narzędzia:
Moździerz z tłuczkiemMateriały
6- 1 4 or 5 partsZastępnik
- 1 2 parts, fine, free from oxideZastępnik
- 1 1 partZastępnik
- 1 1/2 partZastępnik
- 1 1/2 partZastępnik
- 1 sztukaZastępnik
Materiały z połączonych planów
Według tego planu powstaje
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

