SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Glass Retort: a Blown Bulb with a Long Neck Bent Down
Bubbles

Autor

Bubbles

14. październik 2026IT
25
0
0
0
0

Glass Retort: a Blown Bulb with a Long Neck Bent Down

A retort is the old distilling vessel: a round glass bulb whose long neck bends down to a receiver, so the neck itself condenses the vapour. Alchemists used it, and so did Lavoisier and Berzelius before condensers. Blow a bulb on a long tube, bend the tube down in a wide flame, and add a corked filling hole on top. The picture: a mid-19th-century glass retort with a stoppered filling hole (Wellcome Collection).
Zaawansowany
Two hours, plus annealing

Instrukcje

1

Blow the bulb on a long tube

Close one end of a long tube, gather glass and blow a round bulb, as for a flask. Keep the rest of the tube full length for the neck.

Materiały do tego kroku:

Zestaw rurek szklanychZestaw rurek szklanych1 sztuka

Potrzebne narzędzia:

Palnik stołowy do dmuchania szkłaPalnik stołowy do dmuchania szkła
Okulary ochronneOkulary ochronne
Rękawice żaroodporneRękawice żaroodporne
2

Bend the neck down

Warm a long stretch of the tube just past the bulb in a wide, soft flame, turning it, until it bends under its own weight. Bend it smoothly so the neck slopes down at a sharp angle, without kinking.

Potrzebne narzędzia:

Palnik stołowy do dmuchania szkłaPalnik stołowy do dmuchania szkła
Rękawice żaroodporneRękawice żaroodporne
3

Filling hole

Heat a spot on the top of the bulb, blow it out into a small bubble, break it off and open it into a short collar with the jacks for a cork.

Potrzebne narzędzia:

Palnik stołowy do dmuchania szkłaPalnik stołowy do dmuchania szkła
Jacks (szczypce szklarskie)Jacks (szczypce szklarskie)
KorkiKorki
4

Cut and anneal

Cut the neck end square, fire-polish it, and anneal the retort in the kiln, cooling slowly.

Potrzebne narzędzia:

Rysik diamentowyRysik diamentowy
Palnik stołowy do dmuchania szkłaPalnik stołowy do dmuchania szkła
Piec ceramicznyPiec ceramiczny
5

Neck length for cooling

Wczytywanie notatnika Jupyter…

Materiały

1

Wymagane narzędzia

7

Według tego planu powstaje

Powiązane blueprinty

Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...