Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Grinding Wheel: Vitrified, Clay-Bonded (Machinery's Handbook, 1924)
The common machine-shop wheel: abrasive grains held in a bond of clay and fluxes, moulded and fired until the clay partly melts and vitrifies. Porous and free-cutting, unaffected by water, acids, oils, heat or cold.
Source: Machinery's Handbook (1924), pp. 1101-1102. Unknown: proportions and temperatures. Picture: the handbook's text.
Zaawansowany
100+ hours firing, a week cooling
Instrukcje
1
1
Mix and mould
Mix and mould
Mix suitable clays and fluxes with the abrasive grain and mould the wheels. Not given: proportions.
Materiały do tego kroku:
Ścierniwo z tlenku glinu1 sztuka
Glina kulkowa (ball clay)1 sztuka
Bryła skalenia1 flux
Woda1 sztukaPotrzebne narzędzia:
Zestaw misek do mieszania
Forma
Pobijak drewniany2
2
Fire and cool
Fire and cool
Burn the wheels continuously for 100 hours or more, longer for bigger wheels, raising the heat gradually until the clay partly melts and vitrifies. Cool slowly for a week, guarding against sudden temperature changes; as it cools the clay binds the grains.
Potrzebne narzędzia:
Piec ceramicznyMateriały
4- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 fluxZastępnik
- 1 sztukaZastępnik
Wymagane narzędzia
4- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
Według tego planu powstaje
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.
