Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Totem Pole of the Haida, Tlingit and Tsimshian: Cedar Log Adzed, Relief-Carved with Crests, Painted and Raised on Guys (Niblack, 1890)
How the Haida, Tlingit and Tsimshian made the carved crest columns we call totem poles, as Albert Niblack recorded them around 1888: a cedar log got out of the forest and hauled up on skids, adzed smooth, relief-carved with the owner's clan crest at the top and his wife's crest and family legends below, painted with ochre or lignite ground with salmon eggs, and raised with poles, props and rope guys into a deep hole at a potlatch.
Zaawansowany
Months to years
Instrukcje
1
1
Read Niblack
Read Niblack
"These are the very tall ones erected in front of the houses, and are generally surmounted by the clan-totem of the chief occupant."
2
2
Plan the crests
Plan the crests
The column tells whose it is: the owner's clan crest at the top (among the Tlingit often the phratry crest, with clan crests below), his wife's crest, which is also his children's, below it, or a family legend tied to his crest. The figures are the owner's own; carve your own family's story, not a copy of someone else's pole (ours).
3
3
Get out the log
Get out the log
Fell a large, straight cedar (ours: western red cedar). Split off what is not wanted with wedges and get the timber out in the rough in the forest, then tow or haul it to the site and lift it onto skids.
Materiały do tego kroku:
Kłoda żywotnika olbrzymiego1 sztukaPotrzebne narzędzia:
Siekiera
Kliny drewniane
Pobijak drewniany
Lina
Drewniany drąg4
4
Smooth the log
Smooth the log
On the skids, smooth-finish the log with the adze. The old blades were green jade-like stone; in Niblack's day the favourite was the end of a broad flat file ground sharp and hafted.
Potrzebne narzędzia:
Ciosła5
5
Carve in relief
Carve in relief
Carve the crests in relief: rough down the surface with the chisel and adze, then smooth by scraping with sharp-edged shells or stones, or rub with dogfish skin for a finished surface. The carving was done by the owner if he was expert, or by carvers he hired.
Materiały do tego kroku:
Skóra koleni1 sztukaPotrzebne narzędzia:
Ciosła
Komplet dłut do drewna
Pobijak drewniany6
6
Grind the paint and paint
Grind the paint and paint
Grind red or brown ochre, charcoal or lignite in a stone mortar. For a lasting black on wood, grind lignite dry with salmon eggs first chewed with cedar bark: it gives the paint body and makes it stick. Paint the figures with hair or fibre brushes (in older times columns were simply daubed with ochre).
Materiały do tego kroku:
Ochra surowa1 sztuka
Węgiel drzewny1 sztuka
Lignit1 sztuka
Ikra łososia1 sztuka
Kora wewnętrzna czerwonego cedru1 sztukaPotrzebne narzędzia:
Moździerz kamienny z tłuczkiem
Cienkie pędzle7
7
Raise the column
Raise the column
Dig a deep hole in front of the house (ours: about a fifth of the pole's length, and well clear of the house front unless you are making a Haida doorway pole). Raise the column with poles, props and rope guys, many people pulling together, set its foot in the hole and pack it firm.
Potrzebne narzędzia:
Łopata
Lina
Drewniany drąg8
8
Troubleshooting
Troubleshooting
Totem pole troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From Albert P. Niblack, *The Coast Indians of Southern Alaska and Northern British Columbia*, **Report of the U.S. National Museum for 1888** (1890), pp. 279-282, 307-309, 319-320, 324 and Plate II (checked on the archive.org scan coastindiansofso00nibl). Among the Haida the column usually stood against the house with the doorway cut through it about three feet up; others stood a few feet in front. Raising was a potlatch: feasting, dancing and gifts, the work itself a small part of the time. Only the wealthy could afford one. Niblack gives no sizes or carving order: species, sizes, hole depth and the order of work are ours.
Materiały
7- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
Według tego planu powstaje
Powiązane blueprinty
Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.


