SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Hardwood Logs: Tree Felled with Notch and Back Cut, Limbed and Bucked
Woody

Autor

Woody

14. październik 2026NO
19
0
0
0
0

Hardwood Logs: Tree Felled with Notch and Back Cut, Limbed and Bucked

Logs come from a felled tree. Cut a V-shaped notch on the side you want it to fall, then a back cut from the other side toward it; the strip left between them is the hinge that steers the fall. Then cut off the branches (limbing) and saw the trunk into logs (bucking). The picture: fallers on springboards beside a notched conifer, Clallam County, Washington, about 1905 (MOHAI 5981): the notch is the same on any tree.
Zaawansowany
A day

Instrukcje

1

Plan the fall

Choose a sound hardwood tree such as oak, maple or beech. Look at its lean and the wind, pick a clear line to fall it on, and clear two escape paths back and to the side.

Materiały do tego kroku:

Drzewo - liściasteDrzewo - liściaste1 sztuka

Potrzebne narzędzia:

Kask ochronnyKask ochronny
2

Cut the notch

On the side of the fall, chop a V-shaped notch about a quarter of the way into the trunk (our choice). Its back line sets the direction.

Potrzebne narzędzia:

SiekieraSiekiera
Kask ochronnyKask ochronny
3

Back cut, leave the hinge

Saw in from the opposite side, a little above the bottom of the notch. Stop short, leaving a strip of wood uncut: the hinge. Tap a wedge into the cut to tip it. Walk away along your escape path as it goes.

Potrzebne narzędzia:

Piła traczkaPiła traczka
Drewniany klin do ścinkiDrewniany klin do ścinki
SiekieraSiekiera
Kask ochronnyKask ochronny
4

Limb it

Cut the branches off flush with the trunk, working from the base toward the top, standing on the other side of the trunk from the branch.

Potrzebne narzędzia:

SiekieraSiekiera
Kask ochronnyKask ochronny
5

Buck into logs

Mark the lengths you need with the chalk line and saw the trunk through at each mark. Prop the trunk so the cut opens and does not pinch the saw.

Potrzebne narzędzia:

Piła traczkaPiła traczka
Sznur traserskiSznur traserski
Drewniany klin do ścinkiDrewniany klin do ścinki
6

How much wood is in the logs

Wczytywanie notatnika Jupyter…
7

Limits

Notch, back cut, hinge, limbing and bucking follow Wikipedia's account of tree felling; the notch depth is ours. A falling tree kills: fell only trees you are able to, with no one inside two tree-lengths.

Materiały

1

Wymagane narzędzia

5

Powiązane blueprinty

Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...