Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Homemade Hacksaw Frame Cut from Hard Wood (Boy Mechanic, 1915)
A hacksaw frame sawn from one piece of hard wood: the blade is bolted into a slot at the handle end and tensioned at the far end by a bolt with a bent sheet-metal head whose tongue sits in a saw cut so the blade cannot twist.
Początkujący
Two hours
Instrukcje
1
1
Read the Boy Mechanic
Read the Boy Mechanic
"The frame is made of hard wood. The saw end is inserted in a slot sawed in the handle end, and a screw or small bolt holds it in place."
2
2
Cut the frame
Cut the frame
Saw the frame from one piece of hard wood as in the figure: a long back with a handle end (with a hand-hole) and a short far end, open between them for the blade.
Materiały do tego kroku:
Deska z drewna liściastego1 sztukaPotrzebne narzędzia:
Piła ręczna
Piłka włosowa
Świder korbowy z wiertłem
Pilniki (pilnik ręczny)3
3
Fix the handle end
Fix the handle end
Saw a slot in the handle end, slip one end of the blade in, and hold it with a screw or small bolt through the blade's hole.
Materiały do tego kroku:
Brzeszczot do piłki do metalu1 sztuka
Śruba zamkowa1 sztukaPotrzebne narzędzia:
Piła ręczna
Wiertarka ręczna4
4
Make the tension bolt
Make the tension bolt
Bend a sheet-metal head onto a bolt (A in the figure) and fix the blade's other end to it. Pass the bolt through the far end of the frame and tighten its nut to draw the blade taut. A projection of the sheet metal fits a saw cut in the frame so the blade cannot turn.
Materiały do tego kroku:
Arkusz blachy białej1 sztuka
Śruba zamkowa1 sztuka
Nakrętka skrzydełkowa1 sztukaPotrzebne narzędzia:
Nożyce do blachy
Szczypce płaskie
Wiertarka ręczna
Piła ręczna5
5
Troubleshooting
Troubleshooting
Wooden hacksaw troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 426, by W. A. Henry (checked on the archive.org scan boymechanicbook200chic2). No sizes are given; the wing nut and tools are ours.
Materiały
5- 1 sztukaZastępnik
- 1 sztukaZastępnik
- 2 sztukZastępnik
- 1 sztukaZastępnik
- 1 sztukaZastępnik
Wymagane narzędzia
7- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
Według tego planu powstaje
Powiązane blueprinty
Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

