SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
ZIELONA PRZYSZŁOŚĆ
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Making an Ektara — India's One-String Drone You Bend by Squeezing
Woody

Autor

Woody

3. lipiec 2026NO
0
0
0
0
0

Making an Ektara — India's One-String Drone You Bend by Squeezing

Build an ektara — literally 'one string': a gourd drum with a split-bamboo neck and a single string. Pluck it for a drone, then SQUEEZE the neck to slacken the string and bend the note down. A buildable school project that puts one of music's deepest facts — tension sets pitch — right in your hand.
Początkujący
45 minutes

Instrukcje

1

One string, bent by hand

The ektara — 'ek' one, 'tara' string — is the drone of India's wandering singers. You pluck its single string and SQUEEZE its springy neck to bend the note up and down.
2

Prepare the gourd resonator

Cut the top off a dried bottle gourd to make an open bowl. This gourd is the sound-body of the instrument.

Materiały do tego kroku:

Mature Bottle GourdMature Bottle Gourd1 sztuka

Tools needed:

Sloyd Carving KnifeSloyd Carving Knife
3

Skin the opening

Soak a piece of rawhide, stretch it drum-tight over the open mouth of the gourd, glue and lash it down, and let it dry hard. This skin will boom when the string is plucked.

Materiały do tego kroku:

RawhideRawhide1 sztuka
PVA Wood GluePVA Wood Glue1 sztuka
4

Split the neck

Take a length of bamboo and split it partway down into two long, springy arms — a forked neck that can flex when squeezed.

Materiały do tego kroku:

BambooBamboo1 sztuka

Tools needed:

Sloyd Carving KnifeSloyd Carving Knife
5

Fix the neck to the gourd

Fit the two arms of the neck onto opposite sides of the gourd, straddling the skin, and lash them on firmly so they stand up tall and springy.

Materiały do tego kroku:

Abaca Tying TwineAbaca Tying Twine1 sztuka
6

Fit the tuning peg

Bore a hole near the top of the neck and fit a single tuning peg.

Materiały do tego kroku:

Tuning PegsTuning Pegs1 sztuka

Tools needed:

AwlAwl
7

Attach the string

Tie the string to the very centre of the skin, run it straight up between the two neck arms, and wind it onto the peg.

Materiały do tego kroku:

Steel Music Wire 0.032"Steel Music Wire 0.032"1 sztuka
8

Tune the drone

Turn the peg until the string gives a clear, ringing note. This single note is the drone the whole instrument is built around.
9

Pluck it

Pluck the string with one finger. The skin booms and the string rings out its steady drone, richer and louder than a bare string could ever be.
10

Squeeze to bend the note

Now SQUEEZE the two neck arms together. They flex inward, slackening the string, and the note DROPS. Let go and it springs back up — the ektara's bouncing 'boing'.
11

Play with the beat

Pluck in time and pulse your squeeze so the drone bends up and down under the rhythm — the hypnotic sound the Baul singers of Bengal carry through their songs.
12

Compendium — tension, pitch and the skin drum

The ektara turns one of the deepest facts of music into something you feel in your hand: a string's pitch depends on its TENSION. Pull a string tighter and it rises; let it go slack and it falls. On most instruments the tension stays fixed while you play, and you change the note by shortening the string with frets or fingers — but the ektara does the opposite. Its one string never changes length; instead, squeezing the two springy arms of the split-bamboo neck bends them inward, which slackens the string and drops the pitch, and releasing them lets the arms spring back so the note rises. That living, sliding drone is the ektara's whole voice. It is the same physics as the musical bow, whose string tension bends the wooden stave into a bow — here the idea is simply turned around, with the player doing the bending by hand. And like the erhu and the banjo, the ektara sings through a skin: the string is tied to the middle of a stretched membrane over the gourd, and that membrane radiates the sound far more strongly than a bare string could. The ektara is the instrument of India's wandering singers, above all the Bauls of Bengal; add a second string and a longer neck and it grows toward the dotara and the wider family of Indian lutes.

Materiały

7

Wymagane narzędzia

2

You can swap these in

Can't get one of the materials? Swap it for an equivalent — these work just as well.

Powiązane blueprinty

Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...