SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Krypton and Xenon: Liquid-Air Residues Cleaned and Fractionated at the Temperature of Liquid Air (Ramsay and Travers, 1901)
Charlie

Autor

Charlie

1. listopad 2026DE
0
0
0
0
0

Krypton and Xenon: Liquid-Air Residues Cleaned and Fractionated at the Temperature of Liquid Air (Ramsay and Travers, 1901)

When liquid air boils away, the heavy noble gases stay in the last of it. Ramsay and Travers took that residue, stripped out the oxygen and nitrogen, and separated what was left by condensing it in liquid air and letting it boil off in fractions: argon first, then krypton, and xenon last of all. Result: krypton and xenon gases (a litre of liquid air gives at most 0.1-0.2 cc of xenon). Source: M. W. Travers, The Experimental Study of Gases (1901), pp. 218-222. Hydrogen is flammable; liquid air is very cold. Picture drawn by Youblob.
Zaawansowany
2 weeks

Instrukcje

1

Collect the last of the liquid air

Let liquid air evaporate quietly in a vacuum vessel. The last of it is nearly all oxygen with some nitrogen, argon, krypton and xenon; evaporate it into a gasholder. Work from much liquid air: one litre gives at best 0.1-0.2 cc of xenon.

Materiały do tego kroku:

Ciekłe powietrzeCiekłe powietrze1 many litres

Potrzebne narzędzia:

Naczynie próżniowe (Dewara)Naczynie próżniowe (Dewara)
Zbiornik gazuZbiornik gazu
2

Strip out oxygen and nitrogen

Pass the gas with hydrogen through a heated iron tube to remove the oxygen. Absorb the nitrogen with a mixture of magnesium and lime. Pass it over heated copper oxide to take out traces of carbon monoxide and hydrogen, then treat it with soda solution. Ours: a tube furnace for the heating.

Potrzebne narzędzia:

WodórWodór
Rura żelaznaRura żelazna
Piec rurowyPiec rurowy
MagnezMagnez
Wapno paloneWapno palone
Tlenek miedziTlenek miedzi
Roztwór wodorotlenku soduRoztwór wodorotlenku sodu
Zbiornik gazuZbiornik gazu
3

First fractionation

Condense the gas in a bulb cooled by liquid air. Let the first part, mostly argon, boil off into a gasholder; collect the rest. Take the last traces off with the pump while the liquid-air vessel is lowered, so the xenon comes too. Travers got about 300 cc of heavy gas.

Potrzebne narzędzia:

Rurka szklanaRurka szklana
Ciekłe powietrzeCiekłe powietrze
Naczynie próżniowe (Dewara)Naczynie próżniowe (Dewara)
Pompa próżniowaPompa próżniowa
Zbiornik gazuZbiornik gazu
4

Refractionate

Condense and boil off again in six equal portions, throwing away the argon-rich first ones, and repeat, guided by the spectroscope. Let the liquid-air surface just touch the bottom of the bulb while the gas goes in, then immerse it; take every fraction off through the pump. Krypton has a vapour pressure of no more than 150 mm at this temperature; xenon hardly any.

Potrzebne narzędzia:

Rurka szklanaRurka szklana
Ciekłe powietrzeCiekłe powietrze
Naczynie próżniowe (Dewara)Naczynie próżniowe (Dewara)
Pompa próżniowaPompa próżniowa
Spektroskop ręcznySpektroskop ręczny
5

Part krypton from xenon

Condense the mixed gas and pump off everything that will come: that is krypton. Then lower the liquid air and collect the xenon. Repeat on each part several times, since krypton hides in the solid xenon.

Potrzebne narzędzia:

Rurka szklanaRurka szklana
Ciekłe powietrzeCiekłe powietrze
Naczynie próżniowe (Dewara)Naczynie próżniowe (Dewara)
Pompa próżniowaPompa próżniowa
Zbiornik gazuZbiornik gazu

Materiały

1

Wymagane narzędzia

13

Powiązane blueprinty

Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...