Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Lead Came Mould: Two Hinged Grooved Irons (Theophilus, tr. Hendrie 1847)
Forge

Autor

Forge

4. listopad 2026NO
10
0
0
0
0

Lead Came Mould: Two Hinged Grooved Irons (Theophilus, tr. Hendrie 1847)

The iron mould in which Theophilus cast the lead rods of glass windows: two irons a yard long, hinged at one end with a nail, filed to close without a chink of light, with a matching groove hollowed down the middle of each so the lead poured in makes one rod. The free ends are made a little wider and thinner to form a pouring mouth, and the two halves are keyed so they cannot slip while casting. Source: Theophilus, De Diversis Artibus, Book II, ch. XXIV, tr. R. Hendrie (1847), p. 147. Picture: the chapter.
Średniozaawansowany
Unknown

Instrukcje

1

Hinge the irons

Take two irons two fingers broad, one finger thick and a yard long. Join them at one end like a hinge, fastened by a nail, so they open and shut. Make the other ends a little wider and thinner, so that when shut they form the start of a cavity (the pouring mouth). Not given: how the hinge is formed.

Materiały do tego kroku:

Pręty żelaza kutegoPręty żelaza kutego2 2 fingers x 1 finger x 1 yard
GwoździeGwoździe1 hinge pin

Potrzebne narzędzia:

MłotekMłotek
2

Fit the faces

Let the outer sides lie even, and file the two faces together until no light shows between them when closed.

Potrzebne narzędzia:

Pilnik do metaluPilnik do metalu
3

Cut the grooves

Open the irons. With a rule, draw two narrow lines down the middle of each piece, facing each other, from top to bottom. Hollow out between them with the chasing iron used for hollowing lamps, as deep as you wish, and rasp a little inside so the lead poured in makes one piece. Key the mouth so one half cannot slip on the other while casting.

Potrzebne narzędzia:

LinijkaLinijka
TarnikTarnik

Materiały

2

Wymagane narzędzia

4
  • Zastępnik
  • Zastępnik
  • Zastępnik
  • Zastępnik

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...