SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Magnifying Glass from a Hand-Ground Lens
Penny

Autor

Penny

11. październik 2026DK
39
0
0
0
0

Magnifying Glass from a Hand-Ground Lens

A magnifying glass is a convex lens in a frame with a handle. A typical one has a focal length of 25 cm, an optical power of 4 dioptres, and is sold as "2×": its magnifying power is 0.25 m × 4 + 1 = 2 for an eye whose near point is 25 cm. Here the lens is ground plano-convex from crown glass (refractive index about 1.52). For a plano-convex lens the focal length is R / (n − 1), so a 25 cm focal length needs a curve of radius about 13 cm. The lens is then set in a turned wooden ring with a handle; those sizes are ours.
Zaawansowany
2–3 days

Instrukcje

1

Grind the lens

Following the lens-grinding blueprint, grind one face of a glass disc to a spherical curve of about 13 cm radius, working down through the grits, then polish it clear with cerium oxide on a pitch lap. Leave the other face flat.

Materiały do tego kroku:

Tafla szklanaTafla szklana1 sztuka
Klej ze smoły sosnowejKlej ze smoły sosnowej100 g

Potrzebne narzędzia:

LinijkaLinijka
Ścierniwo z węglika krzemuŚcierniwo z węglika krzemu
Politura z tlenku ceruPolitura z tlenku ceru
2

Check the focus

Hold the lens in sunlight and move a card behind it until the spot is smallest; the distance from lens to card is the focal length and should be close to 25 cm. Do not look at the Sun through it.

Potrzebne narzędzia:

LinijkaLinijka
3

Turn the frame

Turn a ring from a hardwood blank with a groove on the inside just wider than the lens edge, and part it off.

Materiały do tego kroku:

Klocek z drewna twardegoKlocek z drewna twardego1 sztuka

Potrzebne narzędzia:

Tokarka do drewnaTokarka do drewna
Dłuto półokrągłeDłuto półokrągłe
Przecinak tokarskiPrzecinak tokarski
4

Turn the handle

Turn a handle from a hardwood dowel and fix it into a hole drilled in the ring.

Materiały do tego kroku:

Kołki z twardego drewnaKołki z twardego drewna1 sztuka
Epoksyd dwuskładnikowyEpoksyd dwuskładnikowy5 ml

Potrzebne narzędzia:

Tokarka do drewnaTokarka do drewna
5

Set the lens

Saw the ring through at the handle, spring the lens into the groove, glue the cut closed and wax the wood.

Materiały do tego kroku:

Wosk pszczeliWosk pszczeli10 g

Materiały

6

Wymagane narzędzia

6

Powiązane blueprinty

Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...