SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
ZIELONA PRZYSZŁOŚĆ
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Building a Morin Khuur — The Mongolian Horse-Head Fiddle
Woody

Autor

Woody

3. lipiec 2026NO
2
0
0
0
0

Building a Morin Khuur — The Mongolian Horse-Head Fiddle

Build a morin khuur: Mongolia's upright two-string bowed fiddle, crowned with a carved horse's head. Its two strings and its bow are all made of horsehair, over a hide-faced box, with no fingerboard — you stop the strings from the side and slide like a horse's whinny. A serious maker build in the bowed string and the horsehair voice of the steppe.
Średniozaawansowany
Several hours over a few sessions

Instrukcje

1

The voice of the steppe

The morin khuur is Mongolia's horse-head fiddle: an upright two-string bowed fiddle whose strings and bow are all horsehair, over a hide-faced box, topped with a carved horse's head.
2

Build the sound-box

Build a trapezoidal wooden box, a little wider at the bottom than the top, for the sound-body. Leave the front open to take the skin.

Materiały do tego kroku:

Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)1 sztuka
PVA Wood GluePVA Wood Glue1 sztuka

Tools needed:

HacksawHacksaw
3

Face the front with hide

Soak rawhide and stretch it drum-tight over the open front of the box, glue and lash it, and let it dry hard. This skin radiates the sound like a drumhead. (A thin wooden soundboard also works.)

Materiały do tego kroku:

RawhideRawhide1 sztuka
PVA Wood GluePVA Wood Glue1 sztuka
4

Fit the neck

Fix a long neck rising straight up from the top of the box, tall enough to hold the strings clear of the skin.

Materiały do tego kroku:

Dowel RodDowel Rod1 sztuka
PVA Wood GluePVA Wood Glue1 sztuka
5

Carve the horse's head

Carve a horse's head at the very top of the neck. This emblem gives the instrument its name and, the herders say, its spirit.

Tools needed:

Sloyd Carving KnifeSloyd Carving Knife
6

Fit two tuning pegs

Bore two holes in the neck just below the head and fit a friction tuning peg into each.

Materiały do tego kroku:

Tuning PegsTuning Pegs2 sztuk

Tools needed:

AwlAwl
7

Twist the horsehair strings

Each string is a whole BUNDLE of horsehair twisted together — a thicker bundle of about 130 hairs for the low string, a thinner one of about 105 for the high string.

Materiały do tego kroku:

Bow Hair (Horsehair)Bow Hair (Horsehair)1 sztuka
8

String it over a bridge

Carve a small bridge and stand it on the middle of the hide. Tie each horsehair string at the base, run it up over the bridge, and wind it onto a peg.

Tools needed:

Sloyd Carving KnifeSloyd Carving Knife
9

Tune the two strings

Tune the two strings a fourth or a fifth apart. Twist the pegs slowly — horsehair strings stretch, so give them time to settle.
10

Make the bow

String a springy stick with a ribbon of horsehair to make the bow, and rub it well with pine rosin so it grips.

Materiały do tego kroku:

Curved Branch (Bow)Curved Branch (Bow)1 sztuka
Bow Hair (Horsehair)Bow Hair (Horsehair)1 sztuka
11

Bow and side-stop

Hold the fiddle upright on your lap and draw the bow across a string. There is no fingerboard: stop the strings from the SIDE with your fingertips and nails, sliding to bend the note.
12

Make it whinny

Slide smoothly between notes and let the horsehair-on-horsehair rasp sing. The morin khuur is famous for imitating a horse's neigh and carrying Mongolian long-song.
13

Compendium — horsehair, hide and the steppe

The morin khuur is a bowed fiddle, so it sings by the same stick-slip friction as the erhu and the violin: the rosined bow grabs a string, drags it until its tension tears it free, and the string snaps back to be caught again hundreds of times a second — the Helmholtz motion that keeps a bowed note singing for as long as you draw the bow. But almost everything about this fiddle is made of horse. Its two strings are not gut or metal but whole bundles of horsehair twisted together — roughly 130 hairs for the thick 'male' string and 105 for the thin 'female' one — and the bow is horsehair too, so hair bows against hair, giving the morin khuur its soft, breathy, whinnying tone. The sound-box is traditionally faced with stretched hide that radiates the strings' vibration like a drumhead, though many modern makers now use a thin wooden soundboard. And there is no fingerboard: the player stops the strings from the side, with fingertips and nails, so the pitch slides smoothly — which is why the morin khuur can imitate a horse's neigh and carry the long, gliding notes of Mongolian long-song and throat-singing. Its close cousin is the Chinese erhu, and its wider family is the spike-fiddles of the whole Eurasian steppe. Named for the carved horse's head that crowns it, the morin khuur is a national emblem of Mongolia, recognised by UNESCO as a masterpiece of humanity's living heritage.

Materiały

7

Wymagane narzędzia

3

You can swap these in

Can't get one of the materials? Swap it for an equivalent — these work just as well.

Powiązane blueprinty

Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...