Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Pneumatic Trough with Gas Jars: a Tin Basin and Wide-Mouth Bottles (Woodhull, 1895)
Woodhull's school apparatus for collecting a gas over water: a 6 in block-tin basin serves as the pneumatic trough, and 8 oz wide-mouth bottles as the gas jars. A test-tube with a one-hole stopper and a bent glass delivery tube makes the generator; gas from it bubbles up into a water-filled bottle held mouth-down in the basin.
Result: a pneumatic trough and gas jars for collecting oxygen, hydrogen, carbon dioxide and other gases by displacing water.
Source: J. F. Woodhull, Manual of Home-Made Apparatus (1895), pp. 5, 12-13. Unknown: how the basin is made. Picture: Fig. 16 of the book.
Początkujący
Unknown
Instrukcje
1
1
Make the basin and get the jars
Make the basin and get the jars
Use a block-tin basin about 6 inches across as the trough, and 8 oz wide-mouth bottles as the gas jars. Ours: a basin soldered from tinplate. Not given: how the basin is made.
Materiały do tego kroku:
Arkusz blachy białej1 basin
Lut cynowo-ołowiowy1 basin seams
Butelka szklana (bezbarwna)6 8 oz wide-mouth gas jarsPotrzebne narzędzia:
Nożyce do blachy
Lutownica
Nieznana metoda kształtowania2
2
Fit the generator and collect a gas
Fit the generator and collect a gas
Use a 6 x 3/4 inch test-tube as the retort, with a No. 1 one-hole rubber stopper and a delivery tube of 3/16 inch glass tubing bent to run down into the basin. Fill the basin with water. Fill a bottle with water, close it, turn it mouth-down into the basin and open it under the water. Put the delivery tube's end under its mouth. Heat the test-tube by moving it back and forth through the flame, held in the hand rather than on a stand: the gas bubbles up and drives the water out of the bottle. Close each full bottle under water and lift it out. The same set serves for hydrogen, nitrous oxide, nitric oxide, hydrogen sulphide, carbon dioxide and others.
Potrzebne narzędzia:
Probówki
Korki gumowe
Szklana rurka odprowadzająca
Palnik BunsenaMateriały
3- 1 basinZastępnik
- 1 basin seamsZastępnik
- 6 8 oz wide-mouth gas jarsZastępnik
Wymagane narzędzia
7- Zastępnik
- 2 vendors sell this, none ship to you yetZastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
- Zastępnik
Materiały z połączonych planów
Według tego planu powstaje
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.


