SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Reformate: Straight-Run Naphtha over Platinum-Alumina-Fluorine Catalyst at 874 °F and 500 psi (Haensel, UOP, US 2,479,110)
Charlie

Autor

Charlie

29. październik 2026DE
0
0
0
0
0

Reformate: Straight-Run Naphtha over Platinum-Alumina-Fluorine Catalyst at 874 °F and 500 psi (Haensel, UOP, US 2,479,110)

Straight-run naphtha knocks badly in an engine. Passed hot and under pressure over Haensel's platinum catalyst, its molecules are reshaped into aromatics and smaller ones, and the octane number nearly doubles. Result (Ex. I): a Pennsylvania naphtha of octane 41.8 gave 82.5 % by volume of reformate of octane 78.8 (A.S.T.M. motor method). Variable: reforming temperature. At 824 °F: 95.9 % by weight, octane 65.7, too cool. At 874 °F: 83.2 %, octane 78.8; more of the charge goes to gas. Source: Haensel, US 2,479,110 (1949), Ex. I-II. Not given: reactor size, how the products are fractionated. Hot hydrogen and oil vapour under pressure: fire risk. Picture drawn by Youblob.
Ekspert
1 day

Instrukcje

1

Pack the catalyst in a fixed bed

Put the platinum reforming catalyst in the reaction zone as a fixed bed. The oil is passed through it, upward or downward.

Potrzebne narzędzia:

Platynowy katalizator reforminguPlatynowy katalizator reformingu
Reaktor rurowy ze złożem stałymReaktor rurowy ze złożem stałym
2

Feed a straight-run naphtha

Use a straight-run naphtha. Haensel's: a Pennsylvania naphtha boiling from 226 to 350 °F, with an A.S.T.M. motor octane number of 41.8.

Materiały do tego kroku:

Benzyna ciężkaBenzyna ciężka1 as required

Potrzebne narzędzia:

Zbiornik na ropęZbiornik na ropę
3

Start with hydrogen

The reaction can make enough hydrogen for itself, but the patent prefers to bring hydrogen in from outside at the start and then recycle it, so the reaction zone always holds enough.

Potrzebne narzędzia:

WodórWodór
Butla na gaz pod ciśnieniemButla na gaz pod ciśnieniem
4

Reform at 874 °F, 500 psi

Pass the naphtha over the catalyst at about 874 °F and 500 pounds per square inch, at a weight hourly space velocity of about 2: twice the catalyst's weight in oil each hour.

Potrzebne narzędzia:

Reaktor rurowy ze złożem stałymReaktor rurowy ze złożem stałym
Platynowy katalizator reforminguPlatynowy katalizator reformingu
ManometrManometr
5

Fractionate off the hydrogen, collect the reformate

Fractionate the products to separate the hydrogen, which goes back into the process, and recover the reformate: 82.5 % by volume of the charge, octane 78.8. Ours: a fractionating still.

Potrzebne narzędzia:

Alembik do frakcjonowaniaAlembik do frakcjonowania
Butla na gaz pod ciśnieniemButla na gaz pod ciśnieniem
Zbiornik na ropęZbiornik na ropę

Materiały

1

Wymagane narzędzia

7

Według tego planu powstaje

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...