Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Rivet Set from a Strip of Heavy Tin (Boy Mechanic, 1915)
An emergency rivet set for leatherwork: a 3/4 in strip of heavy tin, rolled tight at one end to drive the washer down, and notched at the other end to hold the washer over the rivet while the first blows are struck.
Początkujący
Half an hour
Instrukcje
1
1
Read the Boy Mechanic
Read the Boy Mechanic
"Desiring to rivet some pieces of leather together and having no rivet set, I hastily made one from a strip of heavy sheet tin."
2
2
Cut the strip
Cut the strip
Cut a strip of heavy sheet tin 3/4 in wide (a few inches long is ours).
Materiały do tego kroku:
Arkusz blachy białej1 sztukaPotrzebne narzędzia:
Nożyce do blachy
Pilniki (pilnik ręczny)3
3
Roll one end
Roll one end
Roll one end of the strip up tightly into a solid roll, as in the sketch. This end sets the washer.
Potrzebne narzędzia:
Szczypce płaskie4
4
Notch the other end
Notch the other end
Cut a notch in the other end just wide enough to fit over the rivet's shank.
Potrzebne narzędzia:
Nożyce do blachy
Pilniki (pilnik ręczny)5
5
Use it
Use it
Put the rivet through the leather and the washer on it. Hold the washer down with the notched end and strike the first hammer blows, then turn the tool and finish with the rolled end.
Materiały do tego kroku:
Nity miedziane1 sztukaPotrzebne narzędzia:
Młotek6
6
Troubleshooting
Troubleshooting
Tin rivet set troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 457 (checked on the archive.org scan boymechanicbook200chic2). The strip length and tools are ours.
Materiały
2- 1 sztukaZastępnik
- 1 sztukaZastępnik
Według tego planu powstaje
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.
