Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA

Suspenders With Slotted Leather End Tabs and a Union Cord (Silberman, 1899)
Abraham Silberman of Baltimore received US 632,972, dated 12 September 1899, for a strong, neat way to join the back ends of a pair of men's suspenders. Each shoulder strap ends in a folded leather tab with a slot; a folded fabric loop passes through the slot, and a cord with a loop at each end links the two straps behind, hung from a short elastic strap.
We make the straps of elastic webbing with leather button tabs at the front. All sizes are ours.
Początkujący
About 3 hours
Instrukcje
1
1
Strap length
Strap length
Wczytywanie notatnika Jupyter…
2
2
Read US 632,972
Read US 632,972
"The desideratum is a strong and neat connection of the union-cord A with the back ends of the two shoulder-straps B."
3
3
Cut the straps
Cut the straps
Cut two shoulder straps of 35 mm elastic webbing (ours) to the notebook's length plus turnings, and seal the cut ends with a few stitches so they do not fray.
Materiały do tego kroku:
Taśma elastyczna tkana1 sztukaPotrzebne narzędzia:
Miara zwijana
Nożyczki
Igły do szycia ręcznego4
4
Make the leather end tabs
Make the leather end tabs
For each strap cut a leather tab shaped like his Fig. 2, about 40 x 70 mm (ours). Cut a cross-slot g across the middle, as long as the fabric loop is wide, and crease the tab across along the slot so its two ends come together.
Materiały do tego kroku:
Skóra cielęca1 sztukaPotrzebne narzędzia:
Nóż do skóry
Miara zwijana5
5
Make the fabric loops
Make the fabric loops
Cut a strip of strong cotton, fold it lengthwise with the raw edges in and stitch it, then fold it at the centre to make loop i. Push the two ends through the tab's slot from the fold side so the folded loop projects below the slot, his Fig. 3.
Materiały do tego kroku:
Tkanina bawełniana1 sztuka
Nici do szycia1 sztukaPotrzebne narzędzia:
Nożyczki
Igły do szycia ręcznego6
6
Sew tab, loop and strap together
Sew tab, loop and strap together
Put the strap's back end between the two ends of the fabric loop, and both between the two ends of the folded tab (his Fig. 4). Sew rows of stitches k across the tab, through both sides of the tab, both ends of the loop and the strap; then sew another row k' round the tab's edge, apart from the loop, so the tab is held to the strap directly (his Fig. 5). Make an awl hole for each stitch in the leather.
Materiały do tego kroku:
Nici do szycia1 sztukaPotrzebne narzędzia:
Szydło
Igły do szycia ręcznego7
7
Make the union cord and back strap
Make the union cord and back strap
Make the union cord A of strong cord with a loop j at each end, each loop linking one strap's fabric loop. Join the middle of the cord to the back loop cord h with a short elastic strap e, sewn round both, and make the back cord h with a loop at each end for the back trouser buttons (all lengths ours).
Materiały do tego kroku:
Sznurek1 sztuka
Taśma elastyczna tkana1 sztuka
Nici do szycia1 sztukaPotrzebne narzędzia:
Nożyczki
Igły do szycia ręcznego8
8
Make the front tabs
Make the front tabs
He leaves the front ends to "any preferred form of loops for attaching to the trousers". Ours: fold a leather tab over each strap's front end, stitch it through, and punch and slit a buttonhole in it for the front trouser button.
Materiały do tego kroku:
Skóra cielęca1 sztuka
Nici do szycia1 sztukaPotrzebne narzędzia:
Nóż do skóry
Dziurkacz do skóry
Szydło
Igły do szycia ręcznego9
9
Try them on
Try them on
Button the back loops and front tabs to the trousers. The straps should hold the trousers up with the elastic only slightly stretched; shorten the straps at the front if they sag.
10
10
Troubleshooting
Troubleshooting
Suspenders troubleshooting.
Flow
Loading...
11
11
History and honest limits
History and honest limits
**Abraham Silberman** of Baltimore, US 632,972, dated 12 September 1899, filed 7 July 1899. He claimed the shoulder straps "each having its back end provided with a folded-leather end tab, f, having a cross-slot, g, in the fold, and a fabric loop, i, also folded and inserted through the said cross-slot", and the union cord linking the loops. He gives no sizes or strap material: the elastic webbing, all sizes, the leather and cotton, and the front tabs are ours.
Materiały
5- 2 sztukZastępnik
- 2 sztukZastępnik
- 1 sztukaZastępnik
- 4 sztukZastępnik
- 1 sztukaZastępnik
Według tego planu powstaje
Powiązane blueprinty
Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami
CC0 Domena publiczna
Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.
Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.


