Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Knock-Down Tennis-Court Backstop: Guyed Yellow-Pine Towers on the Ground and Hooked-Down Netting (Boy Mechanic, 1919)
Spartan

Autor

Spartan

14. listopad 2026NO
7
0
0
0
0

Knock-Down Tennis-Court Backstop: Guyed Yellow-Pine Towers on the Ground and Hooked-Down Netting (Boy Mechanic, 1919)

Edward R. Smith's take-down tennis backstop from The Boy Mechanic, Book 3 (1919): two towers about 14 ft high and 50 ft apart, of 4 x 4 and 2 x 4 in yellow pine, stand on brick footings and are guyed with heavy wire; the wire netting hangs from supporting wires on 2 ft crossarms and is hooked to tent stakes at the bottom, so the whole rig comes down between seasons.
Średniozaawansowany
About 2 days

Instrukcje

1

Sizes and wire gauges

Wczytywanie notatnika Jupyter…
2

Read The Boy Mechanic, Book 3

"Instead of setting the supports in the ground, they are set on the ground, and guyed by a system of wire braces."
3

Build the towers and footings

Build two towers about 14 ft high from sound 4 by 4 in and 2 by 4 in yellow-pine timber, to stand 50 ft apart. Make brick foundations, anchored into the ground, for them to stand on, and sink anchors in the ground beyond each end.

Materiały do tego kroku:

Tarcica sosnowaTarcica sosnowa6 sztuk
GwoździeGwoździe1 sztuka
Śruba zamkowaŚruba zamkowa4 sztuk
CegłaCegła20 sztuk

Potrzebne narzędzia:

Piła ręcznaPiła ręczna
Świder korbowy z wiertłemŚwider korbowy z wiertłem
MłotekMłotek
ŁopataŁopata
Miara zwijanaMiara zwijana
4

Guy the towers

Fasten end braces of heavy wire (No. 9) to the top of each tower and guy them to the sunken anchors; they carry the weight of the netting and let a ladder lean safely on the guyed end of a tower.

Materiały do tego kroku:

Drut stalowy ocynkowanyDrut stalowy ocynkowany1 sztuka

Potrzebne narzędzia:

Drabina drewnianaDrabina drewniana
Szczypce płaskieSzczypce płaskie
5

Rig the supporting wires and hang the netting

Run the supporting wires (No. 20 gauge, as printed) between the towers on crossarms of 1 by 1 in wood, 2 ft long, which stop side motion at the top; wire them to the netting and draw them up so it is fairly taut. Add more supporting wires with vertical leaders to the netting to draw its whole length taut. Let the netting run under the towers, held there by wires, nearly to the end guys.

Materiały do tego kroku:

Listwa z drewna iglastegoListwa z drewna iglastego2 sztuk
Drut stalowy ocynkowanyDrut stalowy ocynkowany1 sztuka
Siatka druciana ocynkowanaSiatka druciana ocynkowana1 sztuka

Potrzebne narzędzia:

Drabina drewnianaDrabina drewniana
Szczypce płaskieSzczypce płaskie
Piła ręcznaPiła ręczna
6

Hook down the bottom and mark the guys

Hold the lower edge of the netting down with hooks pinned to the ground by tent stakes, so it can be unhooked to mow. Tie a white flag to each guy wire about 6 ft from the ground so players see it.

Materiały do tego kroku:

Drut żelaznyDrut żelazny1 sztuka
Śledź do namiotuŚledź do namiotu12 sztuk
FlagaFlaga2 sztuk

Potrzebne narzędzia:

MłotekMłotek
Szczypce płaskieSzczypce płaskie
7

Season and troubleshooting

Backstop troubleshooting.

Flow

Loading...
8

History and honest limits

From "A Knock-Down Tennis-Court Backstop" by Edward R. Smith, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, p. 189). He gives no netting height or mesh, no tower framing details and no anchor type, and No. 20 gauge for the supporting cables is as printed. The tools and metric figures are ours.

Materiały

10

Wymagane narzędzia

7

Powiązane blueprinty

Te blueprinty dzielą się wiedzą — technikami, materiałami lub zasadami

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...